2021-07-20 17:05:28,333 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:05:28,334 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:05:28,334 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:05:07 2021-07-20 17:05:28,334 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:10:12 2021-07-20 17:05:28,334 INFO repeater task os38nb_quick starting 16.3 seconds late 2021-07-20 17:05:30,495 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:05:30,495 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:05:30,495 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:05:07 2021-07-20 17:05:30,495 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:10:12 2021-07-20 17:05:30,496 INFO repeater task os38nb_lastvec starting 18.5 seconds late 2021-07-20 17:05:31,080 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:05:31,080 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:05:07 2021-07-20 17:05:31,080 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:10:12 2021-07-20 17:05:31,081 INFO repeater task os38nb_3dayplots starting 19.8 seconds late 2021-07-20 17:05:34,764 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:05:34,765 INFO repeater task os38nb_3dayplots ended after 3.7 seconds 2021-07-20 17:05:34,765 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:10:11 2021-07-20 17:06:09,854 INFO repeater task wh300_lastensq starting 0.9 seconds late 2021-07-20 17:06:12,503 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:06:12,503 INFO repeater task wh300_lastensq ended after 2.6 seconds 2021-07-20 17:06:12,503 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:06:04 2021-07-20 17:06:12,503 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:08:09 2021-07-20 17:06:12,504 INFO repeater task wh300_quick starting 3.5 seconds late 2021-07-20 17:06:14,902 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:06:14,902 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:06:14,905 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:06:04 2021-07-20 17:06:14,905 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:08:09 2021-07-20 17:06:14,905 INFO repeater task wh300_lastvec starting 5.9 seconds late 2021-07-20 17:06:15,506 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:06:15,506 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:06:04 2021-07-20 17:06:15,506 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:08:09 2021-07-20 17:08:10,766 INFO repeater task wh300_lastensq starting 1.8 seconds late 2021-07-20 17:08:13,193 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:08:13,193 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:08:13,194 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:08:04 2021-07-20 17:08:13,194 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:10:09 2021-07-20 17:08:13,194 INFO repeater task wh300_quick starting 4.2 seconds late 2021-07-20 17:08:15,778 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:08:15,778 INFO repeater task wh300_quick ended after 2.6 seconds 2021-07-20 17:08:15,779 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:08:04 2021-07-20 17:08:15,779 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:10:09 2021-07-20 17:08:15,779 INFO repeater task wh300_lastvec starting 6.8 seconds late 2021-07-20 17:08:16,370 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:08:16,371 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:08:04 2021-07-20 17:08:16,371 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:10:09 2021-07-20 17:10:06,643 INFO repeater task wh300_tsstats starting 0.4 seconds late 2021-07-20 17:10:07,489 INFO repeater task wh300_tsstats ended after 0.8 seconds 2021-07-20 17:10:07,490 INFO repeater task wh300_tsstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:07,490 INFO repeater task wh300_10pings starting 1.3 seconds late 2021-07-20 17:10:07,709 INFO repeater task wh300_10pings ended after 0.2 seconds 2021-07-20 17:10:07,709 INFO repeater task wh300_10pings next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:07,709 INFO repeater task wh300_beamplots starting 1.5 seconds late 2021-07-20 17:10:08,805 INFO repeater task wh300_beamplots ended after 1.1 seconds 2021-07-20 17:10:08,805 INFO repeater task wh300_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:08,806 INFO repeater task wh300_beamplots starting 2.6 seconds late 2021-07-20 17:10:09,952 INFO repeater task wh300_beamplots ended after 1.1 seconds 2021-07-20 17:10:09,952 INFO repeater task wh300_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:09,953 INFO repeater task os150nb_tsstats starting 3.7 seconds late 2021-07-20 17:10:10,739 INFO repeater task os150nb_tsstats ended after 0.8 seconds 2021-07-20 17:10:10,739 INFO repeater task os150nb_tsstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:10,739 INFO repeater task os150nb_10pings starting 4.5 seconds late 2021-07-20 17:10:10,958 INFO repeater task os150nb_10pings ended after 0.2 seconds 2021-07-20 17:10:10,958 INFO repeater task os150nb_10pings next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:10,958 INFO repeater task os150nb_beamplots starting 4.7 seconds late 2021-07-20 17:10:12,061 INFO repeater task os150nb_beamplots ended after 1.1 seconds 2021-07-20 17:10:12,062 INFO repeater task os150nb_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:12,062 INFO repeater task os150nb_beamplots starting 5.8 seconds late 2021-07-20 17:10:13,162 INFO repeater task os150nb_beamplots ended after 1.1 seconds 2021-07-20 17:10:13,163 INFO repeater task os150nb_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:13,163 INFO repeater task os38nb_lastensq starting 1.2 seconds late 2021-07-20 17:10:15,060 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:10:15,060 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:10:15,060 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:10:07 2021-07-20 17:10:15,060 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:15:12 2021-07-20 17:10:15,061 INFO repeater task os38nb_quick starting 3.1 seconds late 2021-07-20 17:10:17,247 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:10:17,247 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:10:17,248 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:10:07 2021-07-20 17:10:17,248 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:15:12 2021-07-20 17:10:17,248 INFO repeater task os38nb_lastvec starting 5.2 seconds late 2021-07-20 17:10:17,824 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:10:17,824 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:10:07 2021-07-20 17:10:17,824 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:15:12 2021-07-20 17:10:17,825 INFO repeater task os38nb_3dayplots starting 6.6 seconds late 2021-07-20 17:10:21,638 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:10:21,638 INFO repeater task os38nb_3dayplots ended after 3.8 seconds 2021-07-20 17:10:21,638 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:15:11 2021-07-20 17:10:21,638 INFO repeater task os38nb_tsstats starting 15.4 seconds late 2021-07-20 17:10:22,434 INFO repeater task os38nb_tsstats ended after 0.8 seconds 2021-07-20 17:10:22,434 INFO repeater task os38nb_tsstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:22,435 INFO repeater task os38nb_10pings starting 16.2 seconds late 2021-07-20 17:10:22,656 INFO repeater task os38nb_10pings ended after 0.2 seconds 2021-07-20 17:10:22,656 INFO repeater task os38nb_10pings next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:22,656 INFO repeater task os38nb_beamplots starting 16.4 seconds late 2021-07-20 17:10:23,764 INFO repeater task os38nb_beamplots ended after 1.1 seconds 2021-07-20 17:10:23,765 INFO repeater task os38nb_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:23,765 INFO repeater task os38nb_beamplots starting 17.5 seconds late 2021-07-20 17:10:24,875 INFO repeater task os38nb_beamplots ended after 1.1 seconds 2021-07-20 17:10:24,875 INFO repeater task os38nb_beamplots next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:24,876 INFO repeater task ggatime_diagnostics starting 18.6 seconds late 2021-07-20 17:10:36,003 INFO repeater task ggatime_diagnostics output: /usr/lib/python3/dist-packages/numpy/ma/core.py:1193: RuntimeWarning: overflow encountered in true_divide result = self.f(da, db, *args, **kwargs) saving figure to /home/adcp/daily_report/ggatime_seapath_auto.png and /home/adcp/daily_report/ggatime_seapath_autoT.png saving figure to /home/adcp/www/figures/ggatime_seapath_auto.png saving figure to /home/adcp/daily_report/ggatime_hydrins_auto.png and /home/adcp/daily_report/ggatime_hydrins_autoT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_auto.png saving figure to /home/adcp/daily_report/ggatime_trimble_auto.png and /home/adcp/daily_report/ggatime_trimble_autoT.png saving figure to /home/adcp/www/figures/ggatime_trimble_auto.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_auto.png and /home/adcp/daily_report/ggatime_trimble_bd982_autoT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_auto.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_auto.png and /home/adcp/daily_report/ggatime_hemisphere_autoT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_auto.png 2021-07-20 17:10:36,003 INFO repeater task ggatime_diagnostics ended after 11.1 seconds 2021-07-20 17:10:36,004 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:36,004 INFO repeater task ggatime_diagnostics starting 29.8 seconds late 2021-07-20 17:10:46,638 INFO repeater task ggatime_diagnostics output: saving figure to /home/adcp/daily_report/ggatime_seapath_fixed.png and /home/adcp/daily_report/ggatime_seapath_fixedT.png saving figure to /home/adcp/www/figures/ggatime_seapath_fixed.png saving figure to /home/adcp/daily_report/ggatime_hydrins_fixed.png and /home/adcp/daily_report/ggatime_hydrins_fixedT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_fixed.png saving figure to /home/adcp/daily_report/ggatime_trimble_fixed.png and /home/adcp/daily_report/ggatime_trimble_fixedT.png saving figure to /home/adcp/www/figures/ggatime_trimble_fixed.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_fixed.png and /home/adcp/daily_report/ggatime_trimble_bd982_fixedT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_fixed.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_fixed.png and /home/adcp/daily_report/ggatime_hemisphere_fixedT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_fixed.png 2021-07-20 17:10:46,639 INFO repeater task ggatime_diagnostics ended after 10.6 seconds 2021-07-20 17:10:46,639 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:46,639 INFO repeater task ggatime_diagnostics starting 40.4 seconds late 2021-07-20 17:10:57,428 INFO repeater task ggatime_diagnostics output: saving figure to /home/adcp/daily_report/ggatime_seapath_zoom.png and /home/adcp/daily_report/ggatime_seapath_zoomT.png saving figure to /home/adcp/www/figures/ggatime_seapath_zoom.png saving figure to /home/adcp/daily_report/ggatime_hydrins_zoom.png and /home/adcp/daily_report/ggatime_hydrins_zoomT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_zoom.png saving figure to /home/adcp/daily_report/ggatime_trimble_zoom.png and /home/adcp/daily_report/ggatime_trimble_zoomT.png saving figure to /home/adcp/www/figures/ggatime_trimble_zoom.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_zoom.png and /home/adcp/daily_report/ggatime_trimble_bd982_zoomT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_zoom.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_zoom.png and /home/adcp/daily_report/ggatime_hemisphere_zoomT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_zoom.png 2021-07-20 17:10:57,428 INFO repeater task ggatime_diagnostics ended after 10.8 seconds 2021-07-20 17:10:57,428 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:57,429 INFO repeater task ggatime_hist starting 51.2 seconds late 2021-07-20 17:10:58,841 INFO repeater task ggatime_hist ended after 1.4 seconds 2021-07-20 17:10:58,842 INFO repeater task ggatime_hist next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:10:58,842 INFO repeater task seapath_hcorrstats starting 52.5 seconds late 2021-07-20 17:11:01,894 INFO repeater task seapath_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:11:01,894 INFO repeater task seapath_hcorrstats ended after 3.1 seconds 2021-07-20 17:11:01,895 INFO repeater task seapath_hcorrstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:11:01,895 INFO repeater task trimble_hcorrstats starting 55.5 seconds late 2021-07-20 17:11:03,502 INFO repeater task trimble_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero could not get trimble stats Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/uhdas-0.0.0-py3.6.egg/EGG-INFO/scripts/run_hbinhcorrstats.py", line 169, in slist = H.print_stats_summary() File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 451, in print_stats_summary self.get_rbin_stats() # ptsPG File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 257, in get_rbin_stats data.set_range((self.startdd, self.enddd), cname=self.cname) File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/file/binfile_n.py", line 298, in set_range if (ddrange[0] > self.ends[cname][-1] or File "/usr/lib/python3/dist-packages/numpy/ma/core.py", line 3220, in __getitem__ dout = self.data[indx] ValueError: no field of name dday 2021-07-20 17:11:03,502 INFO repeater task trimble_hcorrstats ended after 1.6 seconds 2021-07-20 17:11:03,502 INFO repeater task trimble_hcorrstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:11:03,502 INFO repeater task hemisphere_hcorrstats starting 57.1 seconds late 2021-07-20 17:11:05,113 INFO repeater task hemisphere_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero could not get hemisphere stats Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/uhdas-0.0.0-py3.6.egg/EGG-INFO/scripts/run_hbinhcorrstats.py", line 169, in slist = H.print_stats_summary() File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 451, in print_stats_summary self.get_rbin_stats() # ptsPG File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 257, in get_rbin_stats data.set_range((self.startdd, self.enddd), cname=self.cname) File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/file/binfile_n.py", line 298, in set_range if (ddrange[0] > self.ends[cname][-1] or File "/usr/lib/python3/dist-packages/numpy/ma/core.py", line 3220, in __getitem__ dout = self.data[indx] ValueError: no field of name dday 2021-07-20 17:11:05,113 INFO repeater task hemisphere_hcorrstats ended after 1.6 seconds 2021-07-20 17:11:05,113 INFO repeater task hemisphere_hcorrstats next time_to_run is 2021/07/20 17:25:06 2021-07-20 17:11:05,113 INFO repeater task report_generator starting 58.8 seconds late 2021-07-20 17:11:13,389 INFO repeater task report_generator output: cruisename is report_dir is uhdas_dir is 0.0 sec : png archive rsync 0.0 sec : png archive rsync 0.0 sec : png archive rsync 1.0 sec : navplot: plot_rnav.py -s300 --noshow --title SR2105 --outfile /home/data/SR2105/reports/nav_plot_all /home/data/SR2105/rbin/hydrins/*.gps.rbin 1.0 sec : db_timerange: plot_db_timeranges.py --outfile /home/data/SR2105/reports/db_timerange --noshow /home/data/SR2105 0.0 sec : db_timerange: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/nav_plot_all_topo 0.0 sec : db_timerange: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/nav_plot_all_txy 0.0 sec : db_timerange: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/db_timerange 0.0 sec : png_archive: rsync -au /home/data/SR2105/proc/os150nb/png_archive/ /home/data/SR2105/reports/os150nb_pngarchive 0.0 sec : png_archive: rsync -au /home/data/SR2105/proc/os38nb/png_archive/ /home/data/SR2105/reports/os38nb_pngarchive 0.0 sec : png_archive: rsync -au /home/data/SR2105/proc/wh300/png_archive/ /home/data/SR2105/reports/wh300_pngarchive 0.0 sec : uhdas_overview: uhdas_info.py --overview --logfile /home/data/SR2105/reports/uhdas_overview.txt /home/data/SR2105 0.0 sec : adcp_settings: uhdas_info.py --settings --logfile /home/data/SR2105/reports/ADCP_settings.txt /home/data/SR2105 0.0 sec : adcp_cals: uhdas_info.py --cals --logfile /home/data/SR2105/reports/ADCP_cals.txt /home/data/SR2105 1.0 sec : ens_hcorr: plot_enshcorr.py --infile /home/data/SR2105/proc/os150nb/cal/rotate/ens_hcorr.asc --outfile /home/data/SR2105/reports/os150nb_hcorr --yearbase 2021 --titlestring ens_hcorr_sea 0.0 sec : ens_hcorr: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/os150nb_hcorr 1.0 sec : ens_hcorr: plot_enshcorr.py --infile /home/data/SR2105/proc/os38nb/cal/rotate/ens_hcorr.asc --outfile /home/data/SR2105/reports/os38nb_hcorr --yearbase 2021 --titlestring ens_hcorr_sea 0.0 sec : ens_hcorr: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/os38nb_hcorr 1.0 sec : ens_hcorr: plot_enshcorr.py --infile /home/data/SR2105/proc/wh300/cal/rotate/ens_hcorr.asc --outfile /home/data/SR2105/reports/wh300_hcorr --yearbase 2021 --titlestring ens_hcorr_sea 0.0 sec : ens_hcorr: png_thumbnail.py --width 200 --outdir /home/data/SR2105/reports /home/data/SR2105/reports/wh300_hcorr 0.0 sec : pycfg: cp -p /home/data/SR2105/raw/config/SR2105_proc.py /home/data/SR2105/reports/SR2105_proc.py.txt 0.0 sec : pycfg: cp -p /home/data/SR2105/raw/config/SR2105_sensor.py /home/data/SR2105/reports/SR2105_sensor.py.txt 8.0 seconds elapsed html page starts here: /home/data/SR2105/reports/index.html 2021-07-20 17:11:13,390 INFO repeater task report_generator ended after 8.3 seconds 2021-07-20 17:11:13,390 INFO repeater task report_generator next time_to_run is 2021/07/20 18:10:06 2021-07-20 17:11:18,395 INFO repeater task wh300_noisy_temps starting 67.2 seconds late 2021-07-20 17:11:20,744 INFO repeater task wh300_noisy_temps output: /home/data/current_cruise/raw/wh300/*raw saving figure to /home/adcp/daily_report/wh300_noisy_temps.png and /home/adcp/daily_report/wh300_noisy_tempsT.png saving figure to /home/adcp/www/figures/wh300_noisy_temps.png and /home/adcp/www/figures/wh300_noisy_tempsT.png 2021-07-20 17:11:20,744 INFO repeater task wh300_noisy_temps ended after 2.3 seconds 2021-07-20 17:11:20,744 INFO repeater task wh300_noisy_temps next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:11:20,745 INFO repeater task os150_noisy_temps starting 69.5 seconds late 2021-07-20 17:11:23,366 INFO repeater task os150_noisy_temps output: /home/data/current_cruise/raw/os150/*raw saving figure to /home/adcp/daily_report/os150_noisy_temps.png and /home/adcp/daily_report/os150_noisy_tempsT.png saving figure to /home/adcp/www/figures/os150_noisy_temps.png and /home/adcp/www/figures/os150_noisy_tempsT.png 2021-07-20 17:11:23,366 INFO repeater task os150_noisy_temps ended after 2.6 seconds 2021-07-20 17:11:23,366 INFO repeater task os150_noisy_temps next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:11:23,366 INFO repeater task os38_noisy_temps starting 72.1 seconds late 2021-07-20 17:11:25,836 INFO repeater task os38_noisy_temps output: /home/data/current_cruise/raw/os38/*raw saving figure to /home/adcp/daily_report/os38_noisy_temps.png and /home/adcp/daily_report/os38_noisy_tempsT.png saving figure to /home/adcp/www/figures/os38_noisy_temps.png and /home/adcp/www/figures/os38_noisy_tempsT.png 2021-07-20 17:11:25,836 INFO repeater task os38_noisy_temps ended after 2.5 seconds 2021-07-20 17:11:25,836 INFO repeater task os38_noisy_temps next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:11:25,837 INFO repeater task wh300_lastensq starting 76.8 seconds late 2021-07-20 17:11:28,236 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:11:28,236 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:11:28,236 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:10:04 2021-07-20 17:11:28,236 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:12:09 2021-07-20 17:11:28,237 INFO repeater task wh300_quick starting 79.2 seconds late 2021-07-20 17:11:30,848 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:11:30,848 INFO repeater task wh300_quick ended after 2.6 seconds 2021-07-20 17:11:30,848 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:10:04 2021-07-20 17:11:30,848 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:12:09 2021-07-20 17:11:30,849 INFO repeater task wh300_lastvec starting 81.8 seconds late 2021-07-20 17:11:31,432 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:11:31,433 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:10:04 2021-07-20 17:11:31,433 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:12:09 2021-07-20 17:11:31,433 INFO repeater task wh300_3dayplots starting 80.2 seconds late 2021-07-20 17:11:35,371 INFO repeater task wh300_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:11:35,371 INFO repeater task wh300_3dayplots ended after 3.9 seconds 2021-07-20 17:11:35,371 INFO repeater task wh300_3dayplots next time_to_run is 2021/07/20 17:15:11 2021-07-20 17:11:35,372 INFO repeater task os150nb_lastensq starting 85.4 seconds late 2021-07-20 17:11:37,252 INFO repeater task os150nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:11:37,252 INFO repeater task os150nb_lastensq ended after 1.9 seconds 2021-07-20 17:11:37,252 INFO repeater task os150nb_lastensq: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:10:05 2021-07-20 17:11:37,253 INFO repeater task os150nb_lastensq next time_to_run is 2021/07/20 17:15:10 2021-07-20 17:11:37,253 INFO repeater task os150nb_quick starting 87.3 seconds late 2021-07-20 17:11:39,411 INFO repeater task os150nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:11:39,411 INFO repeater task os150nb_quick ended after 2.2 seconds 2021-07-20 17:11:39,411 INFO repeater task os150nb_quick: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:10:05 2021-07-20 17:11:39,412 INFO repeater task os150nb_quick next time_to_run is 2021/07/20 17:15:10 2021-07-20 17:11:39,412 INFO repeater task os150nb_lastvec starting 89.4 seconds late 2021-07-20 17:11:39,983 INFO repeater task os150nb_lastvec ended after 0.6 seconds 2021-07-20 17:11:39,983 INFO repeater task os150nb_lastvec: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:10:05 2021-07-20 17:11:39,984 INFO repeater task os150nb_lastvec next time_to_run is 2021/07/20 17:15:10 2021-07-20 17:11:39,984 INFO repeater task os150nb_3dayplots starting 88.7 seconds late 2021-07-20 17:11:43,741 INFO repeater task os150nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:11:43,741 INFO repeater task os150nb_3dayplots ended after 3.8 seconds 2021-07-20 17:11:43,741 INFO repeater task os150nb_3dayplots next time_to_run is 2021/07/20 17:15:11 2021-07-20 17:12:13,806 INFO repeater task wh300_lastensq starting 4.8 seconds late 2021-07-20 17:12:16,388 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:12:16,388 INFO repeater task wh300_lastensq ended after 2.6 seconds 2021-07-20 17:12:16,388 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:12:04 2021-07-20 17:12:16,388 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:14:09 2021-07-20 17:12:16,389 INFO repeater task wh300_quick starting 7.4 seconds late 2021-07-20 17:12:18,773 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:12:18,774 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:12:18,774 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:12:04 2021-07-20 17:12:18,774 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:14:09 2021-07-20 17:12:18,774 INFO repeater task wh300_lastvec starting 9.8 seconds late 2021-07-20 17:12:19,358 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:12:19,359 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:12:04 2021-07-20 17:12:19,359 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:14:09 2021-07-20 17:14:09,644 INFO repeater task wh300_lastensq starting 0.6 seconds late 2021-07-20 17:14:12,080 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:14:12,081 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:14:12,081 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:14:04 2021-07-20 17:14:12,081 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:16:09 2021-07-20 17:14:12,081 INFO repeater task wh300_quick starting 3.1 seconds late 2021-07-20 17:14:14,424 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:14:14,424 INFO repeater task wh300_quick ended after 2.3 seconds 2021-07-20 17:14:14,425 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:14:04 2021-07-20 17:14:14,425 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:16:09 2021-07-20 17:14:14,425 INFO repeater task wh300_lastvec starting 5.4 seconds late 2021-07-20 17:14:15,019 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:14:15,019 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:14:04 2021-07-20 17:14:15,019 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:16:09 2021-07-20 17:15:10,155 INFO repeater task os150nb_lastensq starting 0.2 seconds late 2021-07-20 17:15:12,016 INFO repeater task os150nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:15:12,016 INFO repeater task os150nb_lastensq ended after 1.9 seconds 2021-07-20 17:15:12,016 INFO repeater task os150nb_lastensq: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:15:05 2021-07-20 17:15:12,016 INFO repeater task os150nb_lastensq next time_to_run is 2021/07/20 17:20:10 2021-07-20 17:15:12,017 INFO repeater task os150nb_quick starting 2.0 seconds late 2021-07-20 17:15:14,211 INFO repeater task os150nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:15:14,211 INFO repeater task os150nb_quick ended after 2.2 seconds 2021-07-20 17:15:14,211 INFO repeater task os150nb_quick: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:15:05 2021-07-20 17:15:14,211 INFO repeater task os150nb_quick next time_to_run is 2021/07/20 17:20:10 2021-07-20 17:15:14,211 INFO repeater task os150nb_lastvec starting 4.2 seconds late 2021-07-20 17:15:14,794 INFO repeater task os150nb_lastvec ended after 0.6 seconds 2021-07-20 17:15:14,794 INFO repeater task os150nb_lastvec: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:15:05 2021-07-20 17:15:14,794 INFO repeater task os150nb_lastvec next time_to_run is 2021/07/20 17:20:10 2021-07-20 17:15:14,795 INFO repeater task os150nb_3dayplots starting 3.6 seconds late 2021-07-20 17:15:18,596 INFO repeater task os150nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:15:18,596 INFO repeater task os150nb_3dayplots ended after 3.8 seconds 2021-07-20 17:15:18,596 INFO repeater task os150nb_3dayplots next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:15:18,597 INFO repeater task os38nb_lastensq starting 6.6 seconds late 2021-07-20 17:15:20,498 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:15:20,498 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:15:20,498 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:15:07 2021-07-20 17:15:20,498 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:20:12 2021-07-20 17:15:20,498 INFO repeater task os38nb_quick starting 8.5 seconds late 2021-07-20 17:15:22,666 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:15:22,666 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:15:22,666 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:15:07 2021-07-20 17:15:22,666 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:20:12 2021-07-20 17:15:22,667 INFO repeater task os38nb_lastvec starting 10.7 seconds late 2021-07-20 17:15:23,252 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:15:23,252 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:15:07 2021-07-20 17:15:23,252 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:20:12 2021-07-20 17:15:23,253 INFO repeater task os38nb_3dayplots starting 12.0 seconds late 2021-07-20 17:15:26,950 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:15:26,950 INFO repeater task os38nb_3dayplots ended after 3.7 seconds 2021-07-20 17:15:26,950 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:15:31,960 INFO repeater task wh300_3dayplots starting 20.7 seconds late 2021-07-20 17:15:35,961 INFO repeater task wh300_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:15:35,962 INFO repeater task wh300_3dayplots ended after 4.0 seconds 2021-07-20 17:15:35,962 INFO repeater task wh300_3dayplots next time_to_run is 2021/07/20 17:20:11 2021-07-20 17:16:11,057 INFO repeater task wh300_lastensq starting 2.1 seconds late 2021-07-20 17:16:13,504 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:16:13,505 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:16:13,505 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:16:04 2021-07-20 17:16:13,505 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:18:09 2021-07-20 17:16:13,505 INFO repeater task wh300_quick starting 4.5 seconds late 2021-07-20 17:16:16,093 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:16:16,094 INFO repeater task wh300_quick ended after 2.6 seconds 2021-07-20 17:16:16,094 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:16:04 2021-07-20 17:16:16,094 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:18:09 2021-07-20 17:16:16,095 INFO repeater task wh300_lastvec starting 7.1 seconds late 2021-07-20 17:16:16,682 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:16:16,682 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:16:04 2021-07-20 17:16:16,682 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:18:09 2021-07-20 17:18:11,974 INFO repeater task wh300_lastensq starting 3.0 seconds late 2021-07-20 17:18:14,390 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:18:14,390 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:18:14,391 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:18:04 2021-07-20 17:18:14,391 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:20:09 2021-07-20 17:18:14,391 INFO repeater task wh300_quick starting 5.4 seconds late 2021-07-20 17:18:16,793 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:18:16,793 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:18:16,793 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:18:04 2021-07-20 17:18:16,793 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:20:09 2021-07-20 17:18:16,794 INFO repeater task wh300_lastvec starting 7.8 seconds late 2021-07-20 17:18:17,378 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:18:17,378 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:18:04 2021-07-20 17:18:17,378 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:20:09 2021-07-20 17:20:12,663 INFO repeater task wh300_noisy_temps starting 1.4 seconds late 2021-07-20 17:20:15,098 INFO repeater task wh300_noisy_temps output: /home/data/current_cruise/raw/wh300/*raw saving figure to /home/adcp/daily_report/wh300_noisy_temps.png and /home/adcp/daily_report/wh300_noisy_tempsT.png saving figure to /home/adcp/www/figures/wh300_noisy_temps.png and /home/adcp/www/figures/wh300_noisy_tempsT.png 2021-07-20 17:20:15,098 INFO repeater task wh300_noisy_temps ended after 2.4 seconds 2021-07-20 17:20:15,098 INFO repeater task wh300_noisy_temps next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:20:15,099 INFO repeater task os150_noisy_temps starting 3.9 seconds late 2021-07-20 17:20:17,667 INFO repeater task os150_noisy_temps output: /home/data/current_cruise/raw/os150/*raw saving figure to /home/adcp/daily_report/os150_noisy_temps.png and /home/adcp/daily_report/os150_noisy_tempsT.png saving figure to /home/adcp/www/figures/os150_noisy_temps.png and /home/adcp/www/figures/os150_noisy_tempsT.png 2021-07-20 17:20:17,667 INFO repeater task os150_noisy_temps ended after 2.6 seconds 2021-07-20 17:20:17,667 INFO repeater task os150_noisy_temps next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:20:17,668 INFO repeater task os38_noisy_temps starting 6.4 seconds late 2021-07-20 17:20:20,219 INFO repeater task os38_noisy_temps output: /home/data/current_cruise/raw/os38/*raw saving figure to /home/adcp/daily_report/os38_noisy_temps.png and /home/adcp/daily_report/os38_noisy_tempsT.png saving figure to /home/adcp/www/figures/os38_noisy_temps.png and /home/adcp/www/figures/os38_noisy_tempsT.png 2021-07-20 17:20:20,219 INFO repeater task os38_noisy_temps ended after 2.6 seconds 2021-07-20 17:20:20,219 INFO repeater task os38_noisy_temps next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:20:20,219 INFO repeater task wh300_lastensq starting 11.2 seconds late 2021-07-20 17:20:22,647 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:20:22,647 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:20:22,647 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:20:04 2021-07-20 17:20:22,647 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:22:09 2021-07-20 17:20:22,648 INFO repeater task wh300_quick starting 13.6 seconds late 2021-07-20 17:20:25,043 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:20:25,043 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:20:25,043 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:20:04 2021-07-20 17:20:25,043 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:22:09 2021-07-20 17:20:25,044 INFO repeater task wh300_lastvec starting 16.0 seconds late 2021-07-20 17:20:25,635 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:20:25,636 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:20:04 2021-07-20 17:20:25,636 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:22:09 2021-07-20 17:20:25,636 INFO repeater task wh300_3dayplots starting 14.4 seconds late 2021-07-20 17:20:29,623 INFO repeater task wh300_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:20:29,623 INFO repeater task wh300_3dayplots ended after 4.0 seconds 2021-07-20 17:20:29,623 INFO repeater task wh300_3dayplots next time_to_run is 2021/07/20 17:25:11 2021-07-20 17:20:29,624 INFO repeater task os150nb_lastensq starting 19.6 seconds late 2021-07-20 17:20:31,564 INFO repeater task os150nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:20:31,564 INFO repeater task os150nb_lastensq ended after 1.9 seconds 2021-07-20 17:20:31,564 INFO repeater task os150nb_lastensq: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:20:05 2021-07-20 17:20:31,564 INFO repeater task os150nb_lastensq next time_to_run is 2021/07/20 17:25:10 2021-07-20 17:20:31,565 INFO repeater task os150nb_quick starting 21.6 seconds late 2021-07-20 17:20:33,710 INFO repeater task os150nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:20:33,710 INFO repeater task os150nb_quick ended after 2.1 seconds 2021-07-20 17:20:33,710 INFO repeater task os150nb_quick: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:20:05 2021-07-20 17:20:33,710 INFO repeater task os150nb_quick next time_to_run is 2021/07/20 17:25:10 2021-07-20 17:20:33,711 INFO repeater task os150nb_lastvec starting 23.7 seconds late 2021-07-20 17:20:34,294 INFO repeater task os150nb_lastvec ended after 0.6 seconds 2021-07-20 17:20:34,295 INFO repeater task os150nb_lastvec: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:20:05 2021-07-20 17:20:34,295 INFO repeater task os150nb_lastvec next time_to_run is 2021/07/20 17:25:10 2021-07-20 17:20:34,295 INFO repeater task os150nb_3dayplots starting 23.1 seconds late 2021-07-20 17:20:38,032 INFO repeater task os150nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:20:38,032 INFO repeater task os150nb_3dayplots ended after 3.7 seconds 2021-07-20 17:20:38,032 INFO repeater task os150nb_3dayplots next time_to_run is 2021/07/20 17:25:11 2021-07-20 17:20:38,033 INFO repeater task os38nb_lastensq starting 26.0 seconds late 2021-07-20 17:20:39,939 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:20:39,939 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:20:39,940 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:20:07 2021-07-20 17:20:39,940 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:25:12 2021-07-20 17:20:39,940 INFO repeater task os38nb_quick starting 27.9 seconds late 2021-07-20 17:20:42,157 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:20:42,157 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:20:42,157 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:20:07 2021-07-20 17:20:42,158 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:25:12 2021-07-20 17:20:42,158 INFO repeater task os38nb_lastvec starting 30.2 seconds late 2021-07-20 17:20:42,735 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:20:42,736 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:20:07 2021-07-20 17:20:42,736 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:25:12 2021-07-20 17:20:42,736 INFO repeater task os38nb_3dayplots starting 31.5 seconds late 2021-07-20 17:20:46,441 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:20:46,441 INFO repeater task os38nb_3dayplots ended after 3.7 seconds 2021-07-20 17:20:46,441 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:25:11 2021-07-20 17:22:11,641 INFO repeater task wh300_lastensq starting 2.6 seconds late 2021-07-20 17:22:14,090 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:22:14,091 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:22:14,091 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:22:04 2021-07-20 17:22:14,091 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:24:09 2021-07-20 17:22:14,091 INFO repeater task wh300_quick starting 5.1 seconds late 2021-07-20 17:22:16,574 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:22:16,574 INFO repeater task wh300_quick ended after 2.5 seconds 2021-07-20 17:22:16,575 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:22:04 2021-07-20 17:22:16,575 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:24:09 2021-07-20 17:22:16,575 INFO repeater task wh300_lastvec starting 7.6 seconds late 2021-07-20 17:22:17,158 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:22:17,159 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:22:04 2021-07-20 17:22:17,159 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:24:09 2021-07-20 17:24:12,454 INFO repeater task wh300_lastensq starting 3.5 seconds late 2021-07-20 17:24:14,895 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:24:14,895 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:24:14,895 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:24:04 2021-07-20 17:24:14,895 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:26:09 2021-07-20 17:24:14,896 INFO repeater task wh300_quick starting 5.9 seconds late 2021-07-20 17:24:17,355 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:24:17,355 INFO repeater task wh300_quick ended after 2.5 seconds 2021-07-20 17:24:17,356 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:24:04 2021-07-20 17:24:17,356 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:26:09 2021-07-20 17:24:17,356 INFO repeater task wh300_lastvec starting 8.4 seconds late 2021-07-20 17:24:17,945 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:24:17,945 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:24:04 2021-07-20 17:24:17,945 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:26:09 2021-07-20 17:25:08,077 INFO repeater task wh300_tsstats starting 1.8 seconds late 2021-07-20 17:25:08,926 INFO repeater task wh300_tsstats ended after 0.8 seconds 2021-07-20 17:25:08,926 INFO repeater task wh300_tsstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:08,926 INFO repeater task wh300_10pings starting 2.7 seconds late 2021-07-20 17:25:09,153 INFO repeater task wh300_10pings ended after 0.2 seconds 2021-07-20 17:25:09,153 INFO repeater task wh300_10pings next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:09,153 INFO repeater task wh300_beamplots starting 2.9 seconds late 2021-07-20 17:25:10,274 INFO repeater task wh300_beamplots ended after 1.1 seconds 2021-07-20 17:25:10,275 INFO repeater task wh300_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:10,275 INFO repeater task wh300_beamplots starting 4.0 seconds late 2021-07-20 17:25:11,401 INFO repeater task wh300_beamplots ended after 1.1 seconds 2021-07-20 17:25:11,402 INFO repeater task wh300_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:11,402 INFO repeater task os150nb_lastensq starting 1.4 seconds late 2021-07-20 17:25:13,288 INFO repeater task os150nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:25:13,288 INFO repeater task os150nb_lastensq ended after 1.9 seconds 2021-07-20 17:25:13,288 INFO repeater task os150nb_lastensq: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:25:05 2021-07-20 17:25:13,288 INFO repeater task os150nb_lastensq next time_to_run is 2021/07/20 17:30:10 2021-07-20 17:25:13,289 INFO repeater task os150nb_quick starting 3.3 seconds late 2021-07-20 17:25:15,417 INFO repeater task os150nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:25:15,417 INFO repeater task os150nb_quick ended after 2.1 seconds 2021-07-20 17:25:15,417 INFO repeater task os150nb_quick: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:25:05 2021-07-20 17:25:15,417 INFO repeater task os150nb_quick next time_to_run is 2021/07/20 17:30:10 2021-07-20 17:25:15,418 INFO repeater task os150nb_lastvec starting 5.4 seconds late 2021-07-20 17:25:16,000 INFO repeater task os150nb_lastvec ended after 0.6 seconds 2021-07-20 17:25:16,000 INFO repeater task os150nb_lastvec: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:25:05 2021-07-20 17:25:16,000 INFO repeater task os150nb_lastvec next time_to_run is 2021/07/20 17:30:10 2021-07-20 17:25:16,000 INFO repeater task os150nb_3dayplots starting 4.8 seconds late 2021-07-20 17:25:19,689 INFO repeater task os150nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:25:19,690 INFO repeater task os150nb_3dayplots ended after 3.7 seconds 2021-07-20 17:25:19,690 INFO repeater task os150nb_3dayplots next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:25:19,690 INFO repeater task os150nb_tsstats starting 13.5 seconds late 2021-07-20 17:25:20,499 INFO repeater task os150nb_tsstats ended after 0.8 seconds 2021-07-20 17:25:20,499 INFO repeater task os150nb_tsstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:20,499 INFO repeater task os150nb_10pings starting 14.3 seconds late 2021-07-20 17:25:20,746 INFO repeater task os150nb_10pings ended after 0.2 seconds 2021-07-20 17:25:20,747 INFO repeater task os150nb_10pings next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:20,747 INFO repeater task os150nb_beamplots starting 14.5 seconds late 2021-07-20 17:25:21,861 INFO repeater task os150nb_beamplots ended after 1.1 seconds 2021-07-20 17:25:21,862 INFO repeater task os150nb_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:21,862 INFO repeater task os150nb_beamplots starting 15.6 seconds late 2021-07-20 17:25:22,979 INFO repeater task os150nb_beamplots ended after 1.1 seconds 2021-07-20 17:25:22,979 INFO repeater task os150nb_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:22,980 INFO repeater task os38nb_lastensq starting 11.0 seconds late 2021-07-20 17:25:24,875 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:25:24,875 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:25:24,875 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:25:07 2021-07-20 17:25:24,875 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:30:12 2021-07-20 17:25:24,875 INFO repeater task os38nb_quick starting 12.9 seconds late 2021-07-20 17:25:27,032 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:25:27,032 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:25:27,032 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:25:07 2021-07-20 17:25:27,032 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:30:12 2021-07-20 17:25:27,033 INFO repeater task os38nb_lastvec starting 15.0 seconds late 2021-07-20 17:25:27,605 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:25:27,606 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:25:07 2021-07-20 17:25:27,606 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:30:12 2021-07-20 17:25:27,606 INFO repeater task os38nb_3dayplots starting 16.4 seconds late 2021-07-20 17:25:31,374 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:25:31,374 INFO repeater task os38nb_3dayplots ended after 3.8 seconds 2021-07-20 17:25:31,374 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:25:31,375 INFO repeater task os38nb_tsstats starting 25.1 seconds late 2021-07-20 17:25:32,161 INFO repeater task os38nb_tsstats ended after 0.8 seconds 2021-07-20 17:25:32,161 INFO repeater task os38nb_tsstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:32,162 INFO repeater task os38nb_10pings starting 25.9 seconds late 2021-07-20 17:25:32,385 INFO repeater task os38nb_10pings ended after 0.2 seconds 2021-07-20 17:25:32,385 INFO repeater task os38nb_10pings next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:32,385 INFO repeater task os38nb_beamplots starting 26.1 seconds late 2021-07-20 17:25:33,477 INFO repeater task os38nb_beamplots ended after 1.1 seconds 2021-07-20 17:25:33,477 INFO repeater task os38nb_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:33,478 INFO repeater task os38nb_beamplots starting 27.2 seconds late 2021-07-20 17:25:34,591 INFO repeater task os38nb_beamplots ended after 1.1 seconds 2021-07-20 17:25:34,591 INFO repeater task os38nb_beamplots next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:34,591 INFO repeater task ggatime_diagnostics starting 28.4 seconds late 2021-07-20 17:25:45,819 INFO repeater task ggatime_diagnostics output: saving figure to /home/adcp/daily_report/ggatime_seapath_auto.png and /home/adcp/daily_report/ggatime_seapath_autoT.png saving figure to /home/adcp/www/figures/ggatime_seapath_auto.png saving figure to /home/adcp/daily_report/ggatime_hydrins_auto.png and /home/adcp/daily_report/ggatime_hydrins_autoT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_auto.png saving figure to /home/adcp/daily_report/ggatime_trimble_auto.png and /home/adcp/daily_report/ggatime_trimble_autoT.png saving figure to /home/adcp/www/figures/ggatime_trimble_auto.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_auto.png and /home/adcp/daily_report/ggatime_trimble_bd982_autoT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_auto.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_auto.png and /home/adcp/daily_report/ggatime_hemisphere_autoT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_auto.png 2021-07-20 17:25:45,819 INFO repeater task ggatime_diagnostics ended after 11.2 seconds 2021-07-20 17:25:45,819 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:45,820 INFO repeater task ggatime_diagnostics starting 39.6 seconds late 2021-07-20 17:25:56,658 INFO repeater task ggatime_diagnostics output: /usr/lib/python3/dist-packages/numpy/ma/core.py:1193: RuntimeWarning: overflow encountered in true_divide result = self.f(da, db, *args, **kwargs) saving figure to /home/adcp/daily_report/ggatime_seapath_fixed.png and /home/adcp/daily_report/ggatime_seapath_fixedT.png saving figure to /home/adcp/www/figures/ggatime_seapath_fixed.png saving figure to /home/adcp/daily_report/ggatime_hydrins_fixed.png and /home/adcp/daily_report/ggatime_hydrins_fixedT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_fixed.png saving figure to /home/adcp/daily_report/ggatime_trimble_fixed.png and /home/adcp/daily_report/ggatime_trimble_fixedT.png saving figure to /home/adcp/www/figures/ggatime_trimble_fixed.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_fixed.png and /home/adcp/daily_report/ggatime_trimble_bd982_fixedT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_fixed.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_fixed.png and /home/adcp/daily_report/ggatime_hemisphere_fixedT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_fixed.png 2021-07-20 17:25:56,658 INFO repeater task ggatime_diagnostics ended after 10.8 seconds 2021-07-20 17:25:56,658 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:25:56,658 INFO repeater task ggatime_diagnostics starting 50.4 seconds late 2021-07-20 17:26:07,435 INFO repeater task ggatime_diagnostics output: saving figure to /home/adcp/daily_report/ggatime_seapath_zoom.png and /home/adcp/daily_report/ggatime_seapath_zoomT.png saving figure to /home/adcp/www/figures/ggatime_seapath_zoom.png saving figure to /home/adcp/daily_report/ggatime_hydrins_zoom.png and /home/adcp/daily_report/ggatime_hydrins_zoomT.png saving figure to /home/adcp/www/figures/ggatime_hydrins_zoom.png saving figure to /home/adcp/daily_report/ggatime_trimble_zoom.png and /home/adcp/daily_report/ggatime_trimble_zoomT.png saving figure to /home/adcp/www/figures/ggatime_trimble_zoom.png saving figure to /home/adcp/daily_report/ggatime_trimble_bd982_zoom.png and /home/adcp/daily_report/ggatime_trimble_bd982_zoomT.png saving figure to /home/adcp/www/figures/ggatime_trimble_bd982_zoom.png saving figure to /home/adcp/daily_report/ggatime_hemisphere_zoom.png and /home/adcp/daily_report/ggatime_hemisphere_zoomT.png saving figure to /home/adcp/www/figures/ggatime_hemisphere_zoom.png 2021-07-20 17:26:07,435 INFO repeater task ggatime_diagnostics ended after 10.8 seconds 2021-07-20 17:26:07,435 INFO repeater task ggatime_diagnostics next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:26:07,436 INFO repeater task ggatime_hist starting 61.2 seconds late 2021-07-20 17:26:08,837 INFO repeater task ggatime_hist ended after 1.4 seconds 2021-07-20 17:26:08,837 INFO repeater task ggatime_hist next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:26:08,837 INFO repeater task seapath_hcorrstats starting 62.5 seconds late 2021-07-20 17:26:11,787 INFO repeater task seapath_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:26:11,787 INFO repeater task seapath_hcorrstats ended after 2.9 seconds 2021-07-20 17:26:11,787 INFO repeater task seapath_hcorrstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:26:11,788 INFO repeater task trimble_hcorrstats starting 65.4 seconds late 2021-07-20 17:26:13,421 INFO repeater task trimble_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero could not get trimble stats Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/uhdas-0.0.0-py3.6.egg/EGG-INFO/scripts/run_hbinhcorrstats.py", line 169, in slist = H.print_stats_summary() File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 451, in print_stats_summary self.get_rbin_stats() # ptsPG File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 257, in get_rbin_stats data.set_range((self.startdd, self.enddd), cname=self.cname) File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/file/binfile_n.py", line 298, in set_range if (ddrange[0] > self.ends[cname][-1] or File "/usr/lib/python3/dist-packages/numpy/ma/core.py", line 3220, in __getitem__ dout = self.data[indx] ValueError: no field of name dday 2021-07-20 17:26:13,422 INFO repeater task trimble_hcorrstats ended after 1.6 seconds 2021-07-20 17:26:13,422 INFO repeater task trimble_hcorrstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:26:13,422 INFO repeater task hemisphere_hcorrstats starting 67.1 seconds late 2021-07-20 17:26:15,052 INFO repeater task hemisphere_hcorrstats output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero could not get hemisphere stats Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/uhdas-0.0.0-py3.6.egg/EGG-INFO/scripts/run_hbinhcorrstats.py", line 169, in slist = H.print_stats_summary() File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 451, in print_stats_summary self.get_rbin_stats() # ptsPG File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/hbin_diagnostics.py", line 257, in get_rbin_stats data.set_range((self.startdd, self.enddd), cname=self.cname) File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/file/binfile_n.py", line 298, in set_range if (ddrange[0] > self.ends[cname][-1] or File "/usr/lib/python3/dist-packages/numpy/ma/core.py", line 3220, in __getitem__ dout = self.data[indx] ValueError: no field of name dday 2021-07-20 17:26:15,052 INFO repeater task hemisphere_hcorrstats ended after 1.6 seconds 2021-07-20 17:26:15,052 INFO repeater task hemisphere_hcorrstats next time_to_run is 2021/07/20 17:40:06 2021-07-20 17:26:20,059 INFO repeater task wh300_lastensq starting 11.1 seconds late 2021-07-20 17:26:22,498 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:26:22,498 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:26:22,498 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:26:04 2021-07-20 17:26:22,498 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:28:09 2021-07-20 17:26:22,499 INFO repeater task wh300_quick starting 13.5 seconds late 2021-07-20 17:26:24,886 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:26:24,886 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:26:24,886 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:26:04 2021-07-20 17:26:24,886 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:28:09 2021-07-20 17:26:24,887 INFO repeater task wh300_lastvec starting 15.9 seconds late 2021-07-20 17:26:25,480 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:26:25,480 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:26:04 2021-07-20 17:26:25,480 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:28:09 2021-07-20 17:26:25,481 INFO repeater task wh300_3dayplots starting 74.2 seconds late 2021-07-20 17:26:29,428 INFO repeater task wh300_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:26:29,428 INFO repeater task wh300_3dayplots ended after 3.9 seconds 2021-07-20 17:26:29,428 INFO repeater task wh300_3dayplots next time_to_run is 2021/07/20 17:30:11 2021-07-20 17:28:09,684 INFO repeater task wh300_lastensq starting 0.7 seconds late 2021-07-20 17:28:12,125 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:28:12,125 INFO repeater task wh300_lastensq ended after 2.4 seconds 2021-07-20 17:28:12,126 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:28:04 2021-07-20 17:28:12,126 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:30:09 2021-07-20 17:28:12,127 INFO repeater task wh300_quick starting 3.1 seconds late 2021-07-20 17:28:14,542 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:28:14,542 INFO repeater task wh300_quick ended after 2.4 seconds 2021-07-20 17:28:14,542 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:28:04 2021-07-20 17:28:14,542 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:30:09 2021-07-20 17:28:14,542 INFO repeater task wh300_lastvec starting 5.5 seconds late 2021-07-20 17:28:15,122 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:28:15,122 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:28:04 2021-07-20 17:28:15,122 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:30:09 2021-07-20 17:30:10,405 INFO repeater task wh300_lastensq starting 1.4 seconds late 2021-07-20 17:30:12,895 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:30:12,896 INFO repeater task wh300_lastensq ended after 2.5 seconds 2021-07-20 17:30:12,896 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:30:04 2021-07-20 17:30:12,896 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:32:09 2021-07-20 17:30:12,896 INFO repeater task wh300_quick starting 3.9 seconds late 2021-07-20 17:30:15,387 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:30:15,387 INFO repeater task wh300_quick ended after 2.5 seconds 2021-07-20 17:30:15,387 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:30:04 2021-07-20 17:30:15,387 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:32:09 2021-07-20 17:30:15,387 INFO repeater task wh300_lastvec starting 6.4 seconds late 2021-07-20 17:30:15,982 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:30:15,982 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:30:04 2021-07-20 17:30:15,982 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:32:09 2021-07-20 17:30:15,983 INFO repeater task wh300_3dayplots starting 4.8 seconds late 2021-07-20 17:30:20,039 INFO repeater task wh300_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:30:20,039 INFO repeater task wh300_3dayplots ended after 4.1 seconds 2021-07-20 17:30:20,039 INFO repeater task wh300_3dayplots next time_to_run is 2021/07/20 17:35:11 2021-07-20 17:30:20,040 INFO repeater task os150nb_lastensq starting 10.0 seconds late 2021-07-20 17:30:21,929 INFO repeater task os150nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:30:21,929 INFO repeater task os150nb_lastensq ended after 1.9 seconds 2021-07-20 17:30:21,930 INFO repeater task os150nb_lastensq: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:30:05 2021-07-20 17:30:21,930 INFO repeater task os150nb_lastensq next time_to_run is 2021/07/20 17:35:10 2021-07-20 17:30:21,930 INFO repeater task os150nb_quick starting 11.9 seconds late 2021-07-20 17:30:24,069 INFO repeater task os150nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:30:24,069 INFO repeater task os150nb_quick ended after 2.1 seconds 2021-07-20 17:30:24,070 INFO repeater task os150nb_quick: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:30:05 2021-07-20 17:30:24,070 INFO repeater task os150nb_quick next time_to_run is 2021/07/20 17:35:10 2021-07-20 17:30:24,070 INFO repeater task os150nb_lastvec starting 14.1 seconds late 2021-07-20 17:30:24,652 INFO repeater task os150nb_lastvec ended after 0.6 seconds 2021-07-20 17:30:24,652 INFO repeater task os150nb_lastvec: Time from /home/data/SR2105/proc/os150nb/load/wrote_ens_time: 2021/07/20 17:30:05 2021-07-20 17:30:24,652 INFO repeater task os150nb_lastvec next time_to_run is 2021/07/20 17:35:10 2021-07-20 17:30:24,653 INFO repeater task os150nb_3dayplots starting 13.4 seconds late 2021-07-20 17:30:28,435 INFO repeater task os150nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:30:28,435 INFO repeater task os150nb_3dayplots ended after 3.8 seconds 2021-07-20 17:30:28,435 INFO repeater task os150nb_3dayplots next time_to_run is 2021/07/20 17:35:11 2021-07-20 17:30:28,436 INFO repeater task os38nb_lastensq starting 16.4 seconds late 2021-07-20 17:30:30,326 INFO repeater task os38nb_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:30:30,326 INFO repeater task os38nb_lastensq ended after 1.9 seconds 2021-07-20 17:30:30,326 INFO repeater task os38nb_lastensq: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:30:07 2021-07-20 17:30:30,326 INFO repeater task os38nb_lastensq next time_to_run is 2021/07/20 17:35:12 2021-07-20 17:30:30,327 INFO repeater task os38nb_quick starting 18.3 seconds late 2021-07-20 17:30:32,494 INFO repeater task os38nb_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:30:32,494 INFO repeater task os38nb_quick ended after 2.2 seconds 2021-07-20 17:30:32,494 INFO repeater task os38nb_quick: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:30:07 2021-07-20 17:30:32,494 INFO repeater task os38nb_quick next time_to_run is 2021/07/20 17:35:12 2021-07-20 17:30:32,495 INFO repeater task os38nb_lastvec starting 20.5 seconds late 2021-07-20 17:30:33,086 INFO repeater task os38nb_lastvec ended after 0.6 seconds 2021-07-20 17:30:33,087 INFO repeater task os38nb_lastvec: Time from /home/data/SR2105/proc/os38nb/load/wrote_ens_time: 2021/07/20 17:30:07 2021-07-20 17:30:33,087 INFO repeater task os38nb_lastvec next time_to_run is 2021/07/20 17:35:12 2021-07-20 17:30:33,087 INFO repeater task os38nb_3dayplots starting 21.8 seconds late 2021-07-20 17:30:36,780 INFO repeater task os38nb_3dayplots output: /usr/lib/python3/dist-packages/numpy/ma/core.py:6592: RuntimeWarning: overflow encountered in power result = np.where(m, fa, umath.power(fa, fb)).view(basetype) /usr/lib/python3/dist-packages/numpy/ma/core.py:1046: RuntimeWarning: overflow encountered in multiply result = self.f(da, db, *args, **kwargs) 2021-07-20 17:30:36,781 INFO repeater task os38nb_3dayplots ended after 3.7 seconds 2021-07-20 17:30:36,781 INFO repeater task os38nb_3dayplots next time_to_run is 2021/07/20 17:35:11 2021-07-20 17:30:41,788 INFO repeater task wh300_noisy_temps starting 30.6 seconds late 2021-07-20 17:30:44,117 INFO repeater task wh300_noisy_temps output: /home/data/current_cruise/raw/wh300/*raw saving figure to /home/adcp/daily_report/wh300_noisy_temps.png and /home/adcp/daily_report/wh300_noisy_tempsT.png saving figure to /home/adcp/www/figures/wh300_noisy_temps.png and /home/adcp/www/figures/wh300_noisy_tempsT.png 2021-07-20 17:30:44,117 INFO repeater task wh300_noisy_temps ended after 2.3 seconds 2021-07-20 17:30:44,117 INFO repeater task wh300_noisy_temps next time_to_run is 2021/07/20 17:40:11 2021-07-20 17:30:44,117 INFO repeater task os150_noisy_temps starting 32.9 seconds late 2021-07-20 17:30:46,714 INFO repeater task os150_noisy_temps output: /home/data/current_cruise/raw/os150/*raw saving figure to /home/adcp/daily_report/os150_noisy_temps.png and /home/adcp/daily_report/os150_noisy_tempsT.png saving figure to /home/adcp/www/figures/os150_noisy_temps.png and /home/adcp/www/figures/os150_noisy_tempsT.png 2021-07-20 17:30:46,714 INFO repeater task os150_noisy_temps ended after 2.6 seconds 2021-07-20 17:30:46,714 INFO repeater task os150_noisy_temps next time_to_run is 2021/07/20 17:40:11 2021-07-20 17:30:46,714 INFO repeater task os38_noisy_temps starting 35.5 seconds late 2021-07-20 17:30:49,186 INFO repeater task os38_noisy_temps output: /home/data/current_cruise/raw/os38/*raw saving figure to /home/adcp/daily_report/os38_noisy_temps.png and /home/adcp/daily_report/os38_noisy_tempsT.png saving figure to /home/adcp/www/figures/os38_noisy_temps.png and /home/adcp/www/figures/os38_noisy_tempsT.png 2021-07-20 17:30:49,186 INFO repeater task os38_noisy_temps ended after 2.5 seconds 2021-07-20 17:30:49,186 INFO repeater task os38_noisy_temps next time_to_run is 2021/07/20 17:40:11 2021-07-20 17:32:09,354 INFO repeater task wh300_lastensq starting 0.4 seconds late 2021-07-20 17:32:11,845 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:32:11,845 INFO repeater task wh300_lastensq ended after 2.5 seconds 2021-07-20 17:32:11,845 INFO repeater task wh300_lastensq: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:32:04 2021-07-20 17:32:11,846 INFO repeater task wh300_lastensq next time_to_run is 2021/07/20 17:34:09 2021-07-20 17:32:11,846 INFO repeater task wh300_quick starting 2.8 seconds late 2021-07-20 17:32:14,351 INFO repeater task wh300_quick output: /usr/lib/python3/dist-packages/matplotlib/axes/_base.py:3285: UserWarning: Attempting to set identical bottom==top results in singular transformations; automatically expanding. bottom=0.0, top=0.0 'bottom=%s, top=%s') % (bottom, top)) 2021-07-20 17:32:14,351 INFO repeater task wh300_quick ended after 2.5 seconds 2021-07-20 17:32:14,351 INFO repeater task wh300_quick: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:32:04 2021-07-20 17:32:14,353 INFO repeater task wh300_quick next time_to_run is 2021/07/20 17:34:09 2021-07-20 17:32:14,353 INFO repeater task wh300_lastvec starting 5.4 seconds late 2021-07-20 17:32:14,943 INFO repeater task wh300_lastvec ended after 0.6 seconds 2021-07-20 17:32:14,943 INFO repeater task wh300_lastvec: Time from /home/data/SR2105/proc/wh300/load/wrote_ens_time: 2021/07/20 17:32:04 2021-07-20 17:32:14,943 INFO repeater task wh300_lastvec next time_to_run is 2021/07/20 17:34:09 2021-07-20 17:34:10,255 INFO repeater task wh300_lastensq starting 1.3 seconds late 2021-07-20 17:34:12,891 INFO repeater task wh300_lastensq output: Error with file: /home/data/SR2105/rbin/seapath/sr2021_200_57600.sea.rbin Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/pycurrents-0.0.0-py3.6-linux-x86_64.egg/pycurrents/adcp/gbin.py", line 382, in make_gridded_headings max_dx=self.max_dt, File "num/src/int1.pyx", line 108, in int1.interp1 File "num/src/int1.pyx", line 153, in int1.interp1_core ZeroDivisionError: integer division or modulo by zero 2021-07-20 17:34:12,891 INFO repeater task wh300_lastensq ended after 2.6 seconds