# other_transformation

auth_name: EPSG
code: 1891
name: Greek to GGRS87 (1)
scope: Better than 5m throughout Greece.
method_auth_name: EPSG
method_code: 9619
method_name: Geographic2D offsets
source_crs_auth_name: EPSG
source_crs_code: 4120
target_crs_auth_name: EPSG
target_crs_code: 4121
area_of_use_auth_name: EPSG
area_of_use_code: 3254
param1_auth_name: EPSG
param1_code: 8601
param1_name: Latitude offset
param1_uom_auth_name: EPSG
param1_uom_code: 9104
param2_auth_name: EPSG
param2_code: 8602
param2_name: Longitude offset
param2_uom_auth_name: EPSG
param2_uom_code: 9104
operation_version: HGS-Grc
description:
More accurate polynomial transformations between Greek / Hatt projection zones and GGRS87 / Greek Grid are available from the Military Geographic Service.


auth_name: EPSG
code: 5134
name: Tokyo 1892 to Korean 1985 (1)
scope: Change of geodetic CRS based on two determinations of Tokyo datum fundamental point.
method_auth_name: EPSG
method_code: 9601
method_name: Longitude rotation
source_crs_auth_name: EPSG
source_crs_code: 5132
target_crs_auth_name: EPSG
target_crs_code: 4162
area_of_use_auth_name: EPSG
area_of_use_code: 3266
param1_auth_name: EPSG
param1_code: 8602
param1_name: Longitude offset
param1_uom_auth_name: EPSG
param1_uom_code: 9104
operation_version: OGP-Kor
description:
Caused by redetermination of longitude of Tokyo datum origin in 1918. Korean 1985 is based on the 1918 determination.


auth_name: EPSG
code: 5241
name: S-JTSK to S-JTSK/05 (1)
scope: Defined as exact.
method_auth_name: EPSG
method_code: 9619
method_name: Geographic2D offsets
source_crs_auth_name: EPSG
source_crs_code: 4156
target_crs_auth_name: EPSG
target_crs_code: 5228
area_of_use_auth_name: EPSG
area_of_use_code: 1079
param1_auth_name: EPSG
param1_code: 8601
param1_name: Latitude offset
param1_uom_auth_name: EPSG
param1_uom_code: 9104
param2_auth_name: EPSG
param2_code: 8602
param2_name: Longitude offset
param2_uom_auth_name: EPSG
param2_uom_code: 9104
operation_version: CUZK-Cze
description:
S-JTSK/05 is derived from the R05 realisation of ETRS89 and constrained to be coincident with S-JTSK.


auth_name: EPSG
code: 5419
name: NGF IGN69 height to EVRF2000 height (1)
scope: Change of height to a different vertical reference surface.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5720
target_crs_auth_name: EPSG
target_crs_code: 5730
area_of_use_auth_name: EPSG
area_of_use_code: 1326
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: EuG-Fra
description:
Determined at 8 points. RMS residual 0.005m, maximum residual 0.010m. The IGN69 vertical reference surface is below the EVRF2000 vertical reference surface.


auth_name: EPSG
code: 5425
name: NAP height to EVRF2000 height (1)
scope: Change of height to a different vertical reference surface.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5709
target_crs_auth_name: EPSG
target_crs_code: 5730
area_of_use_auth_name: EPSG
area_of_use_code: 1275
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: EuG-Nld
description:
Determined at 757 points. RMS residual 0.002m, maximum residual 0.021m. The NAP vertical reference surface is below the EVRF2000 vertical reference surface.


auth_name: EPSG
code: 5427
name: Cascais height to EVRF2000 height (1)
scope: Change of height to a different vertical reference surface.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5780
target_crs_auth_name: EPSG
target_crs_code: 5730
area_of_use_auth_name: EPSG
area_of_use_code: 1294
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: EuG-Prt
description:
Determined at 5 points. RMS residual 0.013m, maximum residual 0.021m. The Cascais vertical reference surface is below the EVRF2000 vertical reference surface.


auth_name: EPSG
code: 5432
name: N60 height to EVRF2000 height (1)
scope: Change of height to a different vertical reference surface.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5717
target_crs_auth_name: EPSG
target_crs_code: 5730
area_of_use_auth_name: EPSG
area_of_use_code: 3333
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: EuG-Fin
description:
Determined at 66 points. RMS residual 0.003m, maximum residual 0.009m. The N60 vertical reference surface is above the EVRF2000 vertical reference surface.


auth_name: EPSG
code: 5448
name: Poolbeg height to Malin Head height (1)
scope: Vertical datum change for topographic mapping and engineering survey. Accuracy 0.1m.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5754
target_crs_auth_name: EPSG
target_crs_code: 5731
area_of_use_auth_name: EPSG
area_of_use_code: 1305
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OSI-Ire
description:
Poolbeg datum plane is 2.7m below Malin Head datum plane. Transformations are subject to localised anomalies.


auth_name: EPSG
code: 5449
name: Poolbeg height to Belfast height (1)
scope: Vertical datum change for large scale topographic mapping and engineering survey. Accuracy 0.1m.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5754
target_crs_auth_name: EPSG
target_crs_code: 5732
area_of_use_auth_name: EPSG
area_of_use_code: 2530
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OSNI-Gbr NI
description:
Poolbeg datum plane is 2.7m below Belfast datum plane. Transformations are subject to localised anomalies.


auth_name: EPSG
code: 5452
name: Belfast height to Malin Head height (1)
description: Belfast vertical reference surface is 37mm below Malin Head surface.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 5732
target_crs_auth_name: EPSG
target_crs_code: 5731
area_of_use_auth_name: EPSG
area_of_use_code: 2530
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OSNI-Gbr NI
scope:
Change of height to a different vertical reference surface for large scale topographic mapping and engineering survey.


auth_name: EPSG
code: 6699
name: JGD2000 (vertical) height to JGD2011 (vertical) height (1)
scope: Approximation at the +/- 0.01m level.
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 6694
target_crs_auth_name: EPSG
target_crs_code: 6695
area_of_use_auth_name: EPSG
area_of_use_code: 4165
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OGP-Jpn ex E Honshu
description:
Excludes areas of eastern Honshu affected by 2008 Iwate-Miyagi and 2011 Tohoku earthquakes (Aomori, Iwate, Miyagi, Akita, Yamagata, Fukushima and Ibaraki prefectures).


auth_name: EPSG
code: 7964
name: Poolbeg height (m) to Malin Head height (1)
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 7962
target_crs_auth_name: EPSG
target_crs_code: 5731
area_of_use_auth_name: EPSG
area_of_use_code: 1305
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OSI-Ire
description:
Poolbeg vertical reference surface is 2.7m below Malin Head surface. Transformations are subject to localised anomalies.

scope:
Change of height to a different vertical reference surface for topographic mapping and engineering survey. Accuracy 0.1m.


auth_name: EPSG
code: 7966
name: Poolbeg height (m) to Belfast height (1)
method_auth_name: EPSG
method_code: 9616
method_name: Vertical Offset
source_crs_auth_name: EPSG
source_crs_code: 7962
target_crs_auth_name: EPSG
target_crs_code: 5732
area_of_use_auth_name: EPSG
area_of_use_code: 1305
param1_auth_name: EPSG
param1_code: 8603
param1_name: Vertical Offset
param1_uom_auth_name: EPSG
param1_uom_code: 9001
operation_version: OSI-Ire
description:
Poolbeg vertical reference surface is 2.7m below Belfast surface. Transformations are subject to localised anomalies.

scope:
Change of height to a different vertical reference surface for topographic mapping and engineering survey. Accuracy 0.1m.


auth_name: EPSG
code: 7978
name: NGVD29 height (ftUS) to NGVD29 depth (ftUS)
description: Change of axis positive direction from up to down.
method_auth_name: EPSG
method_code: 1068
method_name: Height Depth Reversal
source_crs_auth_name: EPSG
source_crs_code: 5702
target_crs_auth_name: EPSG
target_crs_code: 6359
area_of_use_auth_name: EPSG
area_of_use_code: 1323
scope:
Change of axis positive direction to facilitate transformation of heights or depths through concatenated operations.


auth_name: EPSG
code: 8229
name: NAVD88 height to NAVD88 height (ft)
description: Change of unit from metre to International foot (ft). 1ft = 0.3048m.
method_auth_name: EPSG
method_code: 1069
method_name: Change of Vertical Unit
source_crs_auth_name: EPSG
source_crs_code: 5703
target_crs_auth_name: EPSG
target_crs_code: 8228
area_of_use_auth_name: EPSG
area_of_use_code: 4464
param1_auth_name: EPSG
param1_code: 1051
param1_name: Unit conversion scalar
param1_uom_auth_name: EPSG
param1_uom_code: 9201
scope:
Change of unit to facilitate transformation of heights or depths through concatenated operations for States of the US which have adopted International feet for their State Plane coordinate systems.


auth_name: EPSG
code: 10087
name: Jamaica 1875 / Jamaica (Old Grid) to JAD69 / Jamaica National Grid (1)
scope: Topographic mapping.
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 24100
target_crs_auth_name: EPSG
target_crs_code: 24200
area_of_use_auth_name: EPSG
area_of_use_code: 3342
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
description:
Derived by least squares fit at primary triangulation stations. Accuracy will be less outside of this network due to extrapolation.


auth_name: EPSG
code: 10095
name: Mauritania 1999 / UTM zone 28N to WGS 84 / UTM zone 28N (1)
scope: Minerals management.
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3103
target_crs_auth_name: EPSG
target_crs_code: 32628
area_of_use_auth_name: EPSG
area_of_use_code: 2971
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param5_auth_name: EPSG
param5_code: 8640
param5_name: B1
description:
Parameter values consistent with the OGP Affine parametric transformation method derived by OGP from the published Helmert 2D parameter values.


auth_name: EPSG
code: 15857
name: IGN Astro 1960 / UTM zone 28N to Mauritania 1999 / UTM zone 28N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3367
target_crs_auth_name: EPSG
target_crs_code: 3343
area_of_use_auth_name: EPSG
area_of_use_code: 2971
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Parameter values consistent with the OGP Affine parametric transformation method derived by OGP from the published Helmert 2D parameter values. May be used for transformations to WGS 84 - see tfm code 15861.

scope:
Minerals management. Accuracy 40m. Oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to Mauritania 1999 coordinates.


auth_name: EPSG
code: 15858
name: IGN Astro 1960 / UTM zone 29N to Mauritania 1999 / UTM zone 29N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3368
target_crs_auth_name: EPSG
target_crs_code: 3344
area_of_use_auth_name: EPSG
area_of_use_code: 2970
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Parameter values consistent with the OGP Affine parametric transformation method derived by OGP from the published Helmert 2D parameter values. May be used for transformations to WGS 84 - see tfm code 15862.

scope:
Minerals management. Accuracy 40m. Oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to Mauritania 1999 coordinates.


auth_name: EPSG
code: 15859
name: IGN Astro 1960 / UTM zone 30N to Mauritania 1999 / UTM zone 30N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3369
target_crs_auth_name: EPSG
target_crs_code: 3345
area_of_use_auth_name: EPSG
area_of_use_code: 2969
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Parameter values consistent with the OGP Affine parametric transformation method derived by OGP from the published Helmert 2D parameter values. May be used for transformations to WGS 84 - see tfm code 15863.

scope:
Minerals management. Accuracy 40m. Oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to Mauritania 1999 coordinates.


auth_name: EPSG
code: 15861
name: IGN Astro 1960 / UTM zone 28N to WGS 84 / UTM zone 28N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3367
target_crs_auth_name: EPSG
target_crs_code: 32628
area_of_use_auth_name: EPSG
area_of_use_code: 2971
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Transformation taken from IGN Astro 1960 / UTM zone 28N to Mauritania 1999 / UTM zone 28N (1) (tfm code 15857) assuming that Mauritania 1999 is equivalent to WGS 84 within the accuracy of this tfm.

scope:
Minerals management. Accuracy 40m. However, oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to WGS 84 coordinates.


auth_name: EPSG
code: 15862
name: IGN Astro 1960 / UTM zone 29N to WGS 84 / UTM zone 29N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3368
target_crs_auth_name: EPSG
target_crs_code: 32629
area_of_use_auth_name: EPSG
area_of_use_code: 2970
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Transformation taken from IGN Astro 1960 / UTM zone 29N to Mauritania 1999 / UTM zone 29N (1) (tfm code 15858) assuming that Mauritania 1999 is equivalent to WGS 84 within the accuracy of this tfm.

scope:
Minerals management. Accuracy 40m. However, oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to WGS 84 coordinates.


auth_name: EPSG
code: 15863
name: IGN Astro 1960 / UTM zone 30N to WGS 84 / UTM zone 30N (1)
method_auth_name: EPSG
method_code: 9624
method_name: Affine parametric transformation
source_crs_auth_name: EPSG
source_crs_code: 3369
target_crs_auth_name: EPSG
target_crs_code: 32630
area_of_use_auth_name: EPSG
area_of_use_code: 2969
param1_auth_name: EPSG
param1_code: 8623
param1_name: A0
param1_uom_auth_name: EPSG
param1_uom_code: 9001
param2_auth_name: EPSG
param2_code: 8624
param2_name: A1
param2_uom_auth_name: EPSG
param2_uom_code: 9203
param3_auth_name: EPSG
param3_code: 8625
param3_name: A2
param3_uom_auth_name: EPSG
param3_uom_code: 9203
param4_auth_name: EPSG
param4_code: 8639
param4_name: B0
param4_uom_auth_name: EPSG
param4_uom_code: 9001
description:
Transformation taken from IGN Astro 1960 / UTM zone 30N to Mauritania 1999 / UTM zone 30N (1) (tfm code 15859) assuming that Mauritania 1999 is equivalent to WGS 84 within the accuracy of this tfm.

scope:
Minerals management. Accuracy 40m. However, oil industry considers Mining Cadastre 1999 to be exactly defined by reverse application of this transformation to WGS 84 coordinates.


# concatenated_operation

auth_name: EPSG
code: 7811
name: NTF (Paris) to RGF93 (2)
source_crs_auth_name: EPSG
source_crs_code: 4807
target_crs_auth_name: EPSG
target_crs_code: 4171
area_of_use_auth_name: EPSG
area_of_use_code: 3694
operation_version: IOGP-Fra NTv2
description:
Second step is an emulation using NTv2 method of geocentric Interpolation method described in tfm code 7810. Note that the grid file parameters are of opposite sign.

scope:
Approximation to better than 1m of transformation of coordinates referenced to NTF (Paris) to RGF93.


auth_name: EPSG
code: 8047
name: ED50 to WGS 84 (15)
scope: Oil exploration before 2001.
source_crs_auth_name: EPSG
source_crs_code: 4230
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2332
operation_version: NMA-Nor N65 1991
description:
Replaced by codes 8569 and 1612 in 1997 and 2001.¶The concatenation of transformations 1147 and 1146 gives the following position vector tfm: dX=-84.491 dY=-100.559 dZ=-114.209 metres rX= -2.4006 rY=-0.5367 rZ=-2.3742 microradians dS=+0.2947 ppm.


auth_name: EPSG
code: 8243
name: NAD27 to WGS 84 (25)
scope: Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1061
operation_version: EPSG-Can old
description:
Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84. Superseded by NAD27 to WGS 84 (27) (code 8404) in Quebec and NAD27 to WGS 84 (26) (code 8245) elsewhere in Canada.


auth_name: EPSG
code: 8363
name: ETRS89 + Baltic 1957 height to ETRS89 + EVRF2007 height (1)
description: Compound transformation using two separate quasigeoid models (DVRM05 and DMQSK2014E).
source_crs_auth_name: EPSG
source_crs_code: 8360
target_crs_auth_name: EPSG
target_crs_code: 7423
area_of_use_auth_name: EPSG
area_of_use_code: 1211
operation_version: UGKK-Svk
scope:
Recommended method for transforming coordinates between Baltic 1957 height and EVRF2007 height and vice-versa in Slovakia.


auth_name: EPSG
code: 8394
name: NAD27(CGQ77) to WGS 84 (1)
scope: Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4609
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1368
operation_version: EPSG-Can Qc NT1
description:
Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84. Superseded by NAD27(CGQ77) to WGS 84 (2) (code 8564).


auth_name: EPSG
code: 8396
name: AGD66 to WGS 84 (3)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4202
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2283
operation_version: EPSG-Aus ACT 1m
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84. Superseded by AGD66 to WGS 84 (11) (code 8581).


auth_name: EPSG
code: 8398
name: AGD66 to WGS 84 (4)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4202
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1282
operation_version: EPSG-Aus Tas 1m
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84. Superseded by AGD66 to WGS 84 (9) (code 8576).


auth_name: EPSG
code: 8404
name: NAD27 to WGS 84 (27)
scope: Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1368
operation_version: EPSG-Can QC
description:
Approximation at the +/- 1m level assuming that NAD83 is equivalent to WGS 84. Superseded by NAD27 to WGS 84 (31) (code 8565).


auth_name: EPSG
code: 8408
name: AGD66 to WGS 84 (6)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4202
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2285
operation_version: EPSG-Aus Vic 0.1m
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.  Superseded by AGD66 to WGS 84 (11) (code 8578).


auth_name: EPSG
code: 8422
name: NAD83 to WGS 84 (8)
scope: Approximation at the +/- 1m level assuming that NAD83(CSRS98) is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4269
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2376
operation_version: Alb Env-Can AB
description:
The gridded difference file AB_CSRS.DAC in STEP 1 will need to be renamed to AB_CSRS.gsb to run in some software suites. Formats identical, but AB file is provincial fit only.


auth_name: EPSG
code: 8442
name: ETRS89 to S-JTSK (5)
scope: GIS, geodetic survey.
source_crs_auth_name: EPSG
source_crs_code: 4258
target_crs_auth_name: EPSG
target_crs_code: 4156
area_of_use_auth_name: EPSG
area_of_use_code: 1211
operation_version: UGKK-Sk JTSK03
description:
Recommended method of a transformation from ETRS89 to S-JTSK in Slovakia. For reverse transformation see S-JTSK to ETRS89 (6) (code 8443). Both together replace S-JTSK to ETRS89 (4) (code 4827).


auth_name: EPSG
code: 8443
name: S-JTSK to ETRS89 (6)
scope: GIS, geodetic survey.
source_crs_auth_name: EPSG
source_crs_code: 4156
target_crs_auth_name: EPSG
target_crs_code: 4258
area_of_use_auth_name: EPSG
area_of_use_code: 1211
operation_version: UGKK-Sk JTSK03
description:
Recommended method of a transformation from S-JTSK to ETRS89 in Slovakia. For reverse transformation see ETRS89 to S-JTSK (5) (code 8442). Both together replace S-JTSK to ETRS89 (4) (code 4827).


auth_name: EPSG
code: 8508
name: Old Hawaiian to NAD83(HARN) (1)
scope: Assumes NAD83 is coincident with NAD83(HARN). Accuracy about 1m.
source_crs_auth_name: EPSG
source_crs_code: 4135
target_crs_auth_name: EPSG
target_crs_code: 4152
area_of_use_auth_name: EPSG
area_of_use_code: 1334
operation_version: NGS-Usa HI
description:
Uses NADCON method which expects longitudes positive west; EPSG GeogCRSs Old Hawaiian (code 4135), NAD83 (code 4269) and NAD83(HARN) have longitudes positive east. May be taken as approximate transformation Old Hawaiin to WGS 84 - see code 8582.


auth_name: EPSG
code: 8530
name: South Yemen to WGS 84 (1)
scope: Approximation at the +/- 1m level assuming that NGN96 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4164
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1340
operation_version: IGN-Yem South
description:
May be implemented as a single transformation using geocentric translations transformation method with parameter values dX=-76m dY=-138m dZ=+67m.


auth_name: EPSG
code: 8532
name: Indian 1960 to WGS 84 (1)
scope: Oil exploration.
source_crs_auth_name: EPSG
source_crs_code: 4131
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1495
operation_version: PV-Vnm
description:
May be implemented as a single transformation using position vector 7-parameter geocentric transformation method with parameter values dX=+199m dY=+931m dZ=+318.9m rX=rY=0 sec rZ=+0.814 sec dS=-0.38 ppm.


auth_name: EPSG
code: 8537
name: Egypt 1907 to WGS 84 (2)
scope: Oil exploration.
source_crs_auth_name: EPSG
source_crs_code: 4229
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1086
operation_version: MCE-Egy
description:
Used by Shell. May be implemented as a single transformation using position vector 7-parameter geocentric transformation method with parameter values dX=-121.8m dY=+98.1m dZ=-10.7m rX=rY=0 sec rZ=+0.554 sec dS=+0.2263 ppm.


auth_name: EPSG
code: 8560
name: AGD84 to WGS 84 (5)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4203
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1280
operation_version: EPSG-Aus WA
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84. Superseded by AGD84 to WGS 84 (6) (code 8579).


auth_name: EPSG
code: 8562
name: Nord Sahara 1959 to WGS 84 (3)
scope: Oil exploration.
source_crs_auth_name: EPSG
source_crs_code: 4307
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2393
operation_version: CGG-Alg HM
description:
Derived at IGN monument CFP19 using Transit. Can be implemented as a single 7-param Position Vector transformation with parameter values of dX=-156.5m dY=-87.2m dZ=+287.8m; rX=rY=0 rZ=+0.814sec; dS=-0.38ppm.


auth_name: EPSG
code: 8568
name: Deir ez Zor to WGS 84 (1)
scope: Oil exploration
source_crs_auth_name: EPSG
source_crs_code: 4227
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2329
operation_version: EPSG-Syr
description:
Can be implemented as a position vector tfm with param. values dX=-174.6 dY=-3.1 dZ=238.1m; rX=rY=0 rZ=0.814"; dS=-0.38 ppm.


auth_name: EPSG
code: 8569
name: ED50 to WGS 84 (21)
scope: Oil exploration before 1997/2001.
source_crs_auth_name: EPSG
source_crs_code: 4230
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2332
operation_version: EPSG-Nor N65 1997
description:
Included in Statens Kartverk programme wsktrans between 1997 (v3.1) and 2001 (v4.0). Replaced by ED50 to WGS 84 (23) (code 1612) in April 2001.


auth_name: EPSG
code: 8571
name: Accra to WGS 84 (2)
scope: Oil industry.
source_crs_auth_name: EPSG
source_crs_code: 4168
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1505
operation_version: EPSG-Gha
description:
Can be implemented as a position vector tfm dX=-171.16 dY=17.29 dZ=325.21m, rX=rY=0 rZ=0.814", dS=-0.38 ppm. See tfm code 15495. Found in use within oil industry erroneously concatenated as dX=-171.16 dY=17.29 dZ=327.81m, rX=rY0 rZ=0.554", dS=0.2263 ppm.


auth_name: EPSG
code: 8572
name: Amersfoort to WGS 84 (2)
scope: Approximation at the +/- 1m level assuming that ETRS89 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4289
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1275
operation_version: EPSG-Nld
description:
Parameter values for step 1 from Amersfoort to ETRS89 (2) (code 1751). Step 2 assumes that ETRS89 is equivalent to WGS 84 within the accuracy of the transformation. Supersedes Amersfoort to WGS 84 (1) (code 1112).


auth_name: EPSG
code: 8574
name: American Samoa 1962 to WGS 84 (2)
source_crs_auth_name: EPSG
source_crs_code: 4169
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2288
operation_version: EPSG-Asm
description:
Transformation actually to NAD83(HARN), but for many purposes NAD83(HARNS) can be considered to be coincident with WGS 84.

scope:
Transformation actually to NAD83(HARN), but for many purposes NAD83(HARN) can be considered to be coincident with WGS 84.


auth_name: EPSG
code: 8576
name: AGD66 to WGS 84 (9)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4202
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1282
operation_version: EPSG-Aus Tas 1m
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84. Supersedes AGD66 to WGS 84 (4) (code 8398).


auth_name: EPSG
code: 8578
name: AGD66 to WGS 84 (11)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4202
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2287
operation_version: EPSG-Aus
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.  Supersedes AGD66 to WGS 84 (3) (code 8396) and AGD66 to WGS 84 (6) (code 8408).


auth_name: EPSG
code: 8579
name: AGD84 to WGS 84 (6)
scope: Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84.
source_crs_auth_name: EPSG
source_crs_code: 4203
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1280
operation_version: EPSG-Aus WA
description:
Approximation at the +/- 1m level assuming that GDA94 is equivalent to WGS 84. Supersedes AGD84 to WGS 84 (5) (code 8560).


auth_name: EPSG
code: 8581
name: PSD93 to WGS 84 (2)
scope: Oil exploration.
source_crs_auth_name: EPSG
source_crs_code: 4134
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 3288
operation_version: PDO-Omn 93
description:
Replaced by PSD93 to WGS 84 (1) (code 1439) in 1997. Can be implemented as a position vector tfm with parameter values dX= -182.046 dY= -225.604 dZ=+173.384m rX= -0.616 rY= -1.655 rZ=+8.378" dS=16.8673ppm.


auth_name: EPSG
code: 8582
name: Old Hawaiian to WGS 84 (2)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4135
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1334
operation_version: EPSG-Usa Hi
description:
Transformation steps are from Old Hawaiian to NAD83(HARN) (1) (code 8508) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8583
name: Puerto Rico to WGS 84 (2)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4139
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 3634
operation_version: EPSG-PRVI
description:
Transformation steps are from Puerto Rico to NAD83(HARN) (1) (code 4435) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8585
name: NAD27 to WGS 84 (36)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2376
operation_version: EPSG-Can AB
description:
Steps based on concatenated transformation NAD27 to NAD83(CSRS) (3) (code 8635) assuming that NAD83(CSRS) is equivalent to WGS 84.


auth_name: EPSG
code: 8590
name: NAD27 to WGS 84 (37)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1372
operation_version: EPSG-Usa AL
description:
Transformation steps are from NAD27 to NAD83(HARN) (1) (code 8460) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8591
name: NAD27 to WGS 84 (38)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1373
operation_version: EPSG-Usa AZ
description:
Transformation steps are from NAD27 to NAD83(HARN) (2) (code 8461) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8592
name: NAD27 to WGS 84 (39)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1374
operation_version: EPSG-Usa AR
description:
Transformation steps are from NAD27 to NAD83(HARN) (38) (code 8586) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8593
name: NAD27 to WGS 84 (40)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2297
operation_version: EPSG-Usa CA n
description:
Transformation steps are from NAD27 to NAD83(HARN) (3) (code 8462) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8594
name: NAD27 to WGS 84 (41)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2298
operation_version: EPSG-Usa CA s
description:
Transformation steps are from NAD27 to NAD83(HARN) (4) (code 8463) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8595
name: NAD27 to WGS 84 (42)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1376
operation_version: EPSG-Usa CO
description:
Transformation steps are from NAD27 to NAD83(HARN) (5) (code 8464) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8596
name: NAD27 to WGS 84 (43)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1379
operation_version: EPSG-Usa FL
description:
Transformation steps are from NAD27 to NAD83(HARN) (7) (code 8466) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8597
name: NAD27 to WGS 84 (44)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1380
operation_version: EPSG-Usa GA
description:
Transformation steps are from NAD27 to NAD83(HARN) (6) (code 8465) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8598
name: NAD27 to WGS 84 (45)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1382
operation_version: EPSG-Usa IL
description:
Transformation steps are from NAD27 to NAD83(HARN) (36) (code 8553) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8599
name: NAD27 to WGS 84 (46)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1383
operation_version: EPSG-Usa IN
description:
Transformation steps are from NAD27 to NAD83(HARN) (30) (code 8509) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8600
name: NAD27 to WGS 84 (47)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1384
operation_version: EPSG-Usa IA
description:
Transformation steps are from NAD27 to NAD83(HARN) (39) (code 8587) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8601
name: NAD27 to WGS 84 (48)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1385
operation_version: EPSG-Usa KS
description:
Transformation steps are from NAD27 to NAD83(HARN) (31) (code 8510) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8602
name: NAD27 to WGS 84 (49)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1386
operation_version: EPSG-Usa KY
description:
Transformation steps are from NAD27 to NAD83(HARN) (10) (code 8469) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8603
name: NAD27 to WGS 84 (50)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1387
operation_version: EPSG-Usa LA
description:
Transformation steps are from NAD27 to NAD83(HARN) (11) (code 8470) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8604
name: NAD27 to WGS 84 (51)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1388
operation_version: EPSG-Usa ME
description:
Transformation steps are from NAD27 to NAD83(HARN) (13) (code 8472) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8605
name: NAD27 to WGS 84 (52)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2377
operation_version: EPSG-Usa DE MD
description:
Transformation steps are from NAD27 to NAD83(HARN) (12) (code 8471) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8606
name: NAD27 to WGS 84 (53)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2378
operation_version: EPSG-Usa NewEng
description:
Transformation steps are from NAD27 to NAD83(HARN) (17) (code 8476) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8607
name: NAD27 to WGS 84 (54)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1391
operation_version: EPSG-Usa MI
description:
Transformation steps are from NAD27 to NAD83(HARN) (14) (code 8473) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8608
name: NAD27 to WGS 84 (55)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1392
operation_version: EPSG-Usa MN
description:
Transformation steps are from NAD27 to NAD83(HARN) (40) (code 8588) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8609
name: NAD27 to WGS 84 (56)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1393
operation_version: EPSG-Usa MS
description:
Transformation steps are from NAD27 to NAD83(HARN) (15) (code 8474) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8610
name: NAD27 to WGS 84 (57)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1394
operation_version: EPSG-Usa MO
description:
Transformation steps are from NAD27 to NAD83(HARN) (41) (code 8589) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8611
name: NAD27 to WGS 84 (58)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2382
operation_version: EPSG-Usa ID MT e
description:
Transformation steps are from NAD27 to NAD83(HARN) (8) (code 8467) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8612
name: NAD27 to WGS 84 (59)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2383
operation_version: EPSG-Usa ID MT w
description:
Transformation steps are from NAD27 to NAD83(HARN) (9) (code 8468) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8613
name: NAD27 to WGS 84 (60)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1396
operation_version: EPSG-Usa NE
description:
Transformation steps are from NAD27 to NAD83(HARN) (16) (code 8475) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8614
name: NAD27 to WGS 84 (61)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1397
operation_version: EPSG-Usa NV
description:
Transformation steps are from NAD27 to NAD83(HARN) (32) (code 8511) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8615
name: NAD27 to WGS 84 (62)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1399
operation_version: EPSG-Usa NJ
description:
Transformation steps are from NAD27 to NAD83(HARN) (37) (code 8554) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8616
name: NAD27 to WGS 84 (63)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1400
operation_version: EPSG-Usa NM
description:
Transformation steps are from NAD27 to NAD83(HARN) (18) (code 8477) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8617
name: NAD27 to WGS 84 (64)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1401
operation_version: EPSG-Usa NY
description:
Transformation steps are from NAD27 to NAD83(HARN) (19) (code 8478) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8618
name: NAD27 to WGS 84 (65)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1403
operation_version: EPSG-Usa ND
description:
Transformation steps are from NAD27 to NAD83(HARN) (20) (code 8479) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8619
name: NAD27 to WGS 84 (66)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1404
operation_version: EPSG-Usa OH
description:
Transformation steps are from NAD27 to NAD83(HARN) (33) (code 8512) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8620
name: NAD27 to WGS 84 (67)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1405
operation_version: EPSG-Usa OK
description:
Transformation steps are from NAD27 to NAD83(HARN) (21) (code 8480) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8621
name: NAD27 to WGS 84 (68)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2381
operation_version: EPSG-Usa OR WA
description:
Transformation steps are from NAD27 to NAD83(HARN) (27) (code 8487) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8622
name: NAD27 to WGS 84 (69)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1410
operation_version: EPSG-Usa SD
description:
Transformation steps are from NAD27 to NAD83(HARN) (22) (code 6739) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8623
name: NAD27 to WGS 84 (70)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1411
operation_version: EPSG-Usa TN
description:
Transformation steps are from NAD27 to NAD83(HARN) (23) (code 8483) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8624
name: NAD27 to WGS 84 (71)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2379
operation_version: EPSG-Usa TX e
description:
Transformation steps are from NAD27 to NAD83(HARN) (24) (code 8484) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8625
name: NAD27 to WGS 84 (72)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2380
operation_version: EPSG-Usa TX w
description:
Transformation steps are from NAD27 to NAD83(HARN) (25) (code 8485) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8626
name: NAD27 to WGS 84 (73)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1413
operation_version: EPSG-Usa UT
description:
Transformation steps are from NAD27 to NAD83(HARN) (34) (code 8513) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8627
name: NAD27 to WGS 84 (74)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1415
operation_version: EPSG-Usa VA
description:
Transformation steps are from NAD27 to NAD83(HARN) (26) (code 8486) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8628
name: NAD27 to WGS 84 (75)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1417
operation_version: EPSG-Usa WV
description:
Transformation steps are from NAD27 to NAD83(HARN) (35) (code 8514) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8629
name: NAD27 to WGS 84 (76)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1418
operation_version: EPSG-Usa WI
description:
Transformation steps are from NAD27 to NAD83(HARN) (28) (code 8488) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8630
name: NAD27 to WGS 84 (77)
scope: Approximation at the +/- 1m level.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1419
operation_version: EPSG-Usa WY
description:
Transformation steps are from NAD27 to NAD83(HARN) (29) (code 8489) assuming that NAD83(HARN) is equivalent to WGS 84 within the accuracy of the transformation.


auth_name: EPSG
code: 8633
name: Yoff to WGS 84 (1)
scope: Military purposes.
source_crs_auth_name: EPSG
source_crs_code: 4310
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1207
operation_version: EPSG-SEN
description:
Derived via WGS72. Can be used as a single positon vector transformation with parameter vaues of dX = -37 m, dY = +157 m, dZ = +89.5 m, rX = rY = 0 sec, rZ = 0.554 sec, dS = 0.219 ppm


auth_name: EPSG
code: 8634
name: Beduaram to WGS 84 (1)
scope: Oil exploration.
source_crs_auth_name: EPSG
source_crs_code: 4213
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2771
operation_version: ELF-Ner SE
description:
Derived via WGS72BE. Can be used as a single positon vector transformation with parameter vaues of dX = -101 m, dY = -111 m, dZ = +188.9 m, rX = rY = 0 sec, rZ = 0.814 sec, dS = -0.38 ppm


auth_name: EPSG
code: 8646
name: Manoca 1962 to WGS 84 (1)
scope: Oil exploration
source_crs_auth_name: EPSG
source_crs_code: 4193
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2555
operation_version: OGP-Cmr
description:
Derived via WGS72BE. Can be used as a single positon vector transformation with parameter vaues of dX = -56.7 m, dY = -171.8 m, dZ = -40.6 m, rX = rY = 0 sec, rZ = 0.814 sec, dS = -0.38 ppm


auth_name: EPSG
code: 8650
name: Palestine 1923 to WGS 84 (2)
scope: Accuracy: 1m to north and 10m to south of east-west line through Beersheba (31°15'N).
source_crs_auth_name: EPSG
source_crs_code: 4281
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2603
operation_version: SoI-Isr
description:
Can be implemented as a geocentric translation tfm with param. values dX = -229m, dY = -67m, dZ= +277m.


auth_name: EPSG
code: 8651
name: Vientiane 1982 to WGS 84 (1)
scope: Accuracy: 5m.
source_crs_auth_name: EPSG
source_crs_code: 4676
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1138
operation_version: EPSG-Lao
description:
Can be implemented as a geocentric translation tfm with param. values dX = 42.358m, dY = -124.688m, dZ= -37.366m.


auth_name: EPSG
code: 8652
name: Lao 1993 to WGS 84 (1)
scope: Accuracy: 5m.
source_crs_auth_name: EPSG
source_crs_code: 4677
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 1138
operation_version: EPSG-Lao
description:
Can be implemented as a geocentric translation tfm with param. values dX = 43.933m, dY = -129.593m, dZ= -39.331m.


auth_name: EPSG
code: 8655
name: Manoca 1962 to WGS 84 (2)
scope: Oil exploration
source_crs_auth_name: EPSG
source_crs_code: 4193
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2555
operation_version: OGP-Cmr
description:
Derived via WGS 72BE. Can be implemented as a single positon vector transformation with parameter vaues of dX = -56.7 m, dY = -171.8 m, dZ = -38.7 m, rX = rY = 0 sec, rZ = 0.814 sec, dS = -0.38 ppm.


auth_name: EPSG
code: 8656
name: Mhast (offshore) to WGS 84 (1)
scope: Oil industry exploration and production between 1979 and 1987.
source_crs_auth_name: EPSG
source_crs_code: 4705
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 3180
operation_version: OGP-Ago Cab
description:
Derived via WGS 72BE. Can be implemented as a single positon vector transformation with parameter vaues of dX = -255.0 m, dY = -29.0 m, dZ = -103.1 m, rX = rY = 0 sec, rZ = 0.814 sec, dS = -0.38 ppm.


auth_name: EPSG
code: 8657
name: Egypt Gulf of Suez S-650 TL to WGS 84 (1)
scope: Oil industry exploration and production between 1980 and 1984.
source_crs_auth_name: EPSG
source_crs_code: 4706
target_crs_auth_name: EPSG
target_crs_code: 4326
area_of_use_auth_name: EPSG
area_of_use_code: 2341
operation_version: OGP-Egy GoS
description:
Can be implemented as a single positon vector transformation with parameter vaues of dX = -123.0 m, dY = 98.0 m, dZ = 3.9 m, rX = rY = 0 sec, rZ = 0.814 sec, dS = -0.38 ppm. Replaced by Egypt Gulf of Suez S-650 TL to WGS 84 (2) (tfm code 15846).


auth_name: EPSG
code: 9103
name: NAD27 to ITRF2014 (1)
scope: Oil and gas exploration and production.
source_crs_auth_name: EPSG
source_crs_code: 4267
target_crs_auth_name: EPSG
target_crs_code: 7789
area_of_use_auth_name: EPSG
area_of_use_code: 3357
operation_version: IOGP-Usa GoM legacy
description:
For use with legacy data - see CT code 9104 for alternative for new areas. Note that steps 1 and 2 are documented in the geog2D domain, steps 3 and 4 in the geocentric domain. Steps 3 and 4 may be implemented in one operation using CT code 8970.


