11 Adding vertical marker lines to the ADCP views
You can add short vertical marker lines to you ADCP presentation. These lines are used to measure time or distance.
Context
The following options are available:
| • | None: No vertical markers are shown. |
| • | Time: A short vertical line is drawn in the upper part of the echogram once every minute. |
| • | Distance: A short vertical line is drawn in the upper part of the echogram once every specified number of nautical miles. |
Note
This is a visual enhancement. The choice you make has no effect on the overall performance of the EK80 system.
Procedure
| 1 | Click once in the view that you wish to change. The view is activated. It is identified with a thick border.
|
| 2 | Open the Active menu. |
| 3 | Select ADCP View Settings to open the dialog box. |
| 4 | On the left side of the ADCP View Settings dialog box, select Lines to open the page. |
| 5 | Under Ticks select the vertical marker lines you want to use. |
| 6 | Apply the change(s) you have made. Select Apply to apply the chosen setting only to the currently active view.
Select Apply To All Channels to use the chosen settings on all the views in the ADCP presentation.
|
| 7 | Select OK to close the dialog box. |