Ethernet switch description

A high capacity Ethernet switch is a key component of the EK80 system.

If you use more than one transceiver, a high capacity Ethernet switch is required. The Ethernet switch is used to connect each transceiver to the Processor Unit.

The Ethernet switch is not a part of the delivery. This is a commercial item that can be purchased locally.

Note

Make sure that your selected Ethernet switch has a large bandwidth capacity. Minimum 1 Gb (1000BASE-T) is required. You must also make sure that all Ethernet cables are type Cat 5e or better. A slower switch - or low quality cables – will decrease the operational performance of the EK80 system.

1000BASE-T (also known as IEEE 802.3ab) is a standard for gigabit Ethernet over copper wiring. Each 1000BASE-T network segment can be a maximum length of 100 meters (330 feet), and must use Category 5 cable or better (including Cat 5e and Cat 6).

https://en.wikipedia.org/wiki/Gigabit_Ethernet (January 2016)

Kongsberg Maritime may provide a suitable Ethernet switch.