|
• |
Type = The variant type as defined for certain programming languages
|
– |
VT_I4 = Integer 4 bytes |
|
ProcessingMgr / Channels
| Description |
Range |
Unit |
Type |
R/O |
| This parameter specifies which channels that are used on the transceivers. The list includes transceiver type, serial number and transducer name for each channel. |
|
|
VT_BSTR
VT_ARRAY |
Yes |
| Example: |
WBT 5197648-15 ES120-7C |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / BottomDetectionActive
| Description |
Range |
Unit |
Type |
R/O |
| This parameter specifies if the bottom detection is off or on. |
0 = Off
1 = |
|
VT_I4 |
No |
| Example: |
1 |
Since each channel can be presented in multiple views the values for Upper Detection Limit, Lower Detection Limit and Bottom
Backstep must be defined individually.
|
• |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / UpperDetectorLimit |
|
• |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / LowerDetectorLimit |
|
• |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / BottomBackstep |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / UpperDetectorLimit
| Description |
Range |
Unit |
Type |
R/O |
| This is the Minimum Depth setting used for bottom detection. |
<0,10000> |
m |
VT_R8 |
No |
| Example: |
10 |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / LowerDetectorLimit
| Description |
Range |
Unit |
Type |
R/O |
| This is the Maximum Depth setting used for bottom detection. |
<0,10000> |
m |
VT_R8 |
No |
| Example: |
1000 |
ProcessingMgr / <ChannelID> / ChannelProcessingCommon / BottomBackstep
| Description |
Range |
Unit |
Type |
R/O |
| This is the Bottom Backstep setting for the channel. |
<-100,10> |
dB |
VT_R8 |
No |
| Example: |
-50 |