|
• |
Type = The variant type as defined for certain programming languages
|
– |
VT_I4 = Integer 4 bytes |
|
OperationControl / MainOperation
| Description |
Range |
Unit |
Type |
R/O |
| This parameter specifies the main operating mode. |
Inactive
Normal
Replay |
|
VT_BSTR |
No |
| Example: |
Normal |
OperationControl / PlayState
| Description |
Range |
Unit |
Type |
R/O |
| This parameter indicates if the EK80 is running (pinging) or if it has stopped. |
Stopped
Running |
|
VT_BSTR |
No |
| Example: |
Running |
AcousticDeviceSynchroniser / PingMode
| Description |
Range |
Unit |
Type |
R/O |
| Ping Mode |
Single step
Interval
Maximum |
|
VT_BSTR |
No |
| Example: |
Interval |
AcousticDeviceSynchroniser / Interval
| Description |
Range |
Unit |
Type |
R/O |
| Ping Interval |
<10,2E9> |
ms |
VT_I4 |
No |
| Example: |
1000 |
AcousticDeviceSynchroniser / ExtSyncMode
| Description |
Range |
Unit |
Type |
R/O |
| This parameter specifies if and how the transmissions are synchronized. |
StandAlone
Master
Slave |
|
VT_BSTR |
No |
| Example: |
StandAlone |
In order to make the EK80 operate in Slave mode using the Auxiliary connector on the Wide Band Transceiver (WBT), you need to set AcousticDeviceSynchroniser / ExtSyncMode to StandAlone and TransceiverManager / ExternalTrig to 1.
AcousticDeviceSynchroniser / SyncDelay
| Description |
Range |
Unit |
Type |
R/O |
| This parameter controls the synchronization delay. |
<0,1000> |
ms |
VT_I4 |
No |
| Example: |
StandAlone |
In Master mode, the EK80 system waits for the delay time after the external trigger signal has been sent to the slaves before transmitting the ping. This is often referred to as a pre-trigger. In Slave mode, the EK80 system waits for the delay time after the external trigger signal has arrived before transmitting the ping. This is often referred to as a post-trigger.
StateManager / ActivateState
| Description |
Range |
Unit |
Type |
R/O |
| This parameter can be used to change the current user setting. |
|
|
VT_BSTR |
No |
| Example: |
User 3 |