Before you turn on the EK80 system
Before you turn on the EK80 system, make sure that the transducer is submerged in water. If you are using a drop keel, make sure that you have sufficient water depth to lower it.
CautionYou must never set the EK80 system to "ping" unless the transducer is submerged in water. Most transducers are damaged beyond repair if they transmit in open air. Prevent inadvertent use of the EK80 system whenever a transducer is not submerged.
When the EK80 system is not used
When you do not use the EK80 system, turn off the display and the Processor Unit. If you are not using the EK80 system for a long period of time, we recommend that you turn off the transceiver(s).
When you are docking your vessel
You must never turn on the EK80 system when the ship is in dry dock. The transducer(s) may be damaged if the EK80 system transmits in open air. To prevent inadvertent use of the EK80 system, pull out the mains plug on the Processor Unit whenever your vessel is in dry dock. Additional precautionary measurers should be considered.
If something breaks down
If you believe that something has broken down, contact your local dealer. A list of all our dealers is provided on our website.
If you are unable to contact a dealer, observe the support information in this publication.
When you want to turn off the EK80 system
You must never turn off the EK80 system by means of the on/off switch on the Processor Unit. You must ALWAYS select Exit on the top bar.
NoteIf you turn off the EK80 system by means of the on/off switch on the Processor Unit you can damage the software and the interface settings used to
communicate with external devices.
Rules for transducer handling
A transducer must always be handled as a delicate instrument. Incorrect actions may damage the transducer beyond repair. Observe these transducer handling rules:
|
• |
Do not activate the transducer when it is out of the water. |
|
• |
Do not handle the transducer roughly. Avoid impacts. |
|
• |
Do not expose the transducer to direct sunlight or excessive heat. |
|
• |
Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean the transducer. |
|
• |
Do not damage the outer protective skin of the transducer. |
|
• |
Do not damage the outer protective skin of the transducer face. |
|
• |
Do not step on the transducer cable. |
|
• |
Do not damage the transducer cable.Avoid exposure to sharp objects. |